1: Brief Introduction Of 1100 Aluminium/Aluminum
1100 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series).
With a minimum of 99.0% aluminum, it is the most heavily alloyed of the 1000 series. It is also the mechanically
strongest alloy in the series, and is the only 1000-series alloy commonly used in rivets. At the same time, it keeps the
benefits of being relatively lightly alloyed (compared to other series), such as high electrical conductivity, thermal
conductivity, corrosion resistance, and workability. It can be strengthened by cold working, but not by heat treatment.
Machinability:
Aluminium/Aluminum 1100 alloy has excellent machinability especially when the alloy is machined in hard temper. Carbide
tooling is suitable, but high speed steel tooling can also be used. In cases where heavy cuts are required, an oil
lubricant must be used.
Forming:
Both hot and cold forming is easy to perform with Aluminium/Aluminum 1100 alloy. This alloy can be cold worked
extensively in the annealed condition without the need for intermediate annealing.
Welding:
Welding can be easily performed using all the conventional methods. It is suitable to use AL 1100 consumable
electrodes and filler wire for the process.
Heat Treatment:
Aluminium/Aluminum 1100 alloy cannot be successfully heat treated other than to produce the annealed form
and 'O' temper.
Forging:
Aluminium/Aluminum 1100 alloy can be hot forged without much difficulty.
Hot Working:
Hot working can be easily performed on Aluminium/Aluminum 1100 alloy.
Cold Working:
Aluminium/Aluminum 1100 alloy is best suited for cold working as it has good ductility in the annealed temper
condition. It can also be cold formed by bending, drawing or spinning.
Annealing:
After Aluminium/Aluminum 1100 alloy is extensively cold worked, annealing is required and can be performed at
343°C (650°F) for a suitable amount of time so as to ensure thorough heating and then it can be air cooled.
Hardening:
Aluminium/Aluminum 1100 alloy can be hardened by cold working only.
Applications:
Aluminium/Aluminum 1100 alloy is widely used in fin stock, heat exchanger fins, spun hollowware, dials and
name plates, decorative parts, giftware, cooking utensils, rivets and reflectors, and in sheet metal work.
2: Chemical Composition
Aluminum Grades:
1000 series: 1035,1040,1050,1060,1070,1080,1090,1098,1100,1230,1435,1260,1170,1275,1285,1385
2000 series: 2001,2002,2011,2014,2017,2117,2218,2519,2024,2224,2025,2030,2031,2036,2090,2091
3000 series: 3002,3003,3004,3103,3203,3303,3105,3006,3007,3107,3008,3009,3015,3016
5000 series: 5005,5205,5006,5010,5013,5014,5016,5017,5040,5043,5050,5150,5251,5351,5451,5052,5083
5352,5552,5254,5754,5856,5456,5283
6000 series: 6101,6201,6003,6103,6105,6205,6006,6106,6110,6061,6060,6063,6863,6081,6082,6162,6863
7000 series: 7001,7003,7005,7108,7129,7146,7050,7472,7075,7076,7277,7178,7278,7091,7277
8000 series: 8001,8004,8006,8011,8111,8014,8030,8130,8177,8079,8081,8280,8091
Aluminum Temper:
O,H12,H13,H14,H16,H18,H24,H32,H34,H19,H38,G36,F,H111,H112,H192,H392,H393,H321
T1,T3,T4,T8,T72,T451,T42,T62,T5,T6,T36,T351,T651,T851,T3511,T913,T94,T7351,T89,T4510,T6510,T8510,
T8511,T4511,T52,T5511,T6511,T54,T73
The aluminum industry has created a system using a four-digit numerical designation to identify wrought aluminum
alloys. The first digit indicates the major alloying element. The second digit indicates whether there was a modification
in the basic alloy. The third and fourth digit indicates the specific alloy. The following represent the various groups:
| 1XXX |
Aluminum 99% or greater |
| 2XXX |
Copper - major alloying element |
| 3XXX |
Manganese - major alloying element |
| 5XXX |
Magnesium - major alloying element |
| 6XXX |
Magnesium and silicon - major alloying elements |
| 7XXX |
Zinc -major alloying element |
3: Aluminium/Aluminum Alloy Pipe/Tube Process
4: Aluminium/Aluminum Alloy Pipe Package
5: Company Introduction
Audited Supplier 
){kind=link}
){kind=link}