| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics, Industrial, Chemical |
| Standard: | JIS, DIN, BS, ASTM, AISI |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Monel 400 is a nickel-copper alloy (about 67% Ni - 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. monel 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions.
This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, monel 400 is rapidly attacked by nitric acid and ammonia systems.
Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, monel 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.
Monel 400 main characteristics:
Monel 400 corrosion resistant:
Monel 400 is virtually immune to chloride ion stress corrosion cracking in typical environments. Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.
This nickel alloy is attacked in sulfur-bearing gases above approximately 700° F and molten sulfur attacks the alloy at temperatures over approximately 500° F.
Monel 400 offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.
Monel 400 ASTM Specifications:
| Seamless pipe | ASTM B165 | Welded Pipe | ASTM B725 |
| Seamless tube | ASTM B163 | Plate/Sheet | ASTM B127 |
| Forging | ASTM B564 | Bar | ASTM B164 |
Monel 400 Chemical Composition:
| C | Mn | S | Si | Ni | Cu | Fe |
| 0.3 max | 2.0 max | 0.24 max | 0.5 max | 63 min | 28-34 | 2.5 max |
Monel 400 Mechanical Properties:
| Form | Condition | Tensile (Ksi) | 0.2% Yield (Ksi) | Elongation % | Hardness (HRB) |
| Bar | Annealed | 75-90 | 25-50 | 60-35 | 60-80 |
| Bar | Cold drawn | 84-120 | 55-100 | 40-22 | 20-85 |
| Plate | Annealed | 70-85 | 28-50 | 50-35 | 60-76 |
| Sheet | Annealed | 70-85 | 30-45 | 45-35 | 65-80 |
| Pipe | Annealed | 70-85 | 25-45 | 50-35 | 75 max |
Monel 400 application:
| Nickel Sheet | |
| Thickness | 0.3mm - 6.0mm |
| Width | 1000mm - 2200mm |
| Length | Produce as requirement |
| Nickel Plate | |
| Thickness | 3.0mm - 300mm |
| Width | 1000mm - 3000mm |
| Length | Produce as requirement |
| Nickel Strip / Nickel Foil | |
| Thickness | 0.02mm - 16.0mm |
| Width | 5mm - 900mm |
| Nickel Coil | |
| Thickness | 0.3mm - 16.0mm |
| Width | 1000mm - 3000mm |
| Nickel Pipe | |
| Outside Diameter | 6.0mm - 1219mm |
| Thickness | 0.5mm - 100mm |
| Nickel Capillary Pipe | |
| Outside Diameter | 0.5mm - 6.0mm |
| Thickness | 0.05mm - 2.0mm |
| Nickel Bar | |
| Diameter | Ф4mm - Ф600mm |
| Nickel Wire Rod | |
| Diameter | Ф0.01mm - Ф6.0mm |
| Material Classification | |
| Inconel |
Inconel 722, Inconel 725, Inconel X-750, Inconel 625, Inconel 686, Inconel 690, Inconel 702, Inconel 706, Inconel 713C, Inconel 600, Inconel 601, Inconel 602CA, Inconel 617, Inconel 718.
|
| Incoloy | Incoloy 945, Incoloy A-286, Incoloy 901, Incoloy 903, Incoloy 907, Incoloy 909, Incoloy 925, Incoloy 926, Incoloy 330, Incoloy 800, Incoloy 800H, Incoloy 800HT, Incoloy 801, Incoloy 840, Incoloy 20, Incoloy 205, Incoloy 208 |
| Hastelloy | Hastelloy C 276, Hastelloy G, Hastelloy W, Hastelloy X, Hastelloy G-30, Hastelloy G-35, Hastelloy G3, Hastelloy N, Hastelloy S, B-2, Hastelloy B-3, Hastelloy C2000, Hastelloy C22 |
| Haynes | Haynes 75, Haynes 244, Haynes 25, Haynes 263, Haynes 282, Haynes 556, Haynes 188, Haynes 230, Haynes 233, Haynes 242 |
| Monel | Monel 400, Monel K-500, Monel R405, Monel 401, Monel 404, Monel 405. |
| Nimonic | Nimonic 91, Nimonic C263, Nimonic PE11, Nimonic PE16, Nimonic PK33, Nimonic 80A, Nimonic 96, Nimonic 90, Nimonic 901, Nimonic 105, Nimonic 115 |
| Other Nickel | Waspaloy, Multimet N155, Mumetal 80, Rene 41, Kovar, Maraging 250, Maraging 300, Maraging 350, MP159, MP35N, Alloy 46, Alloy 48, Alloy 52, Alloy 42, Alloy 45, Cobalt alloy 6b, Custom 455, Invar 36, Invar 42, Nickel 200, Nickel 201 |
Q: What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.
Q: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.
Q: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.
Q: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, Outokumpu, etc.
Q: What are your company's payment methods?
A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices.
Q: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.
Q: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack it in wooden cases to ensure the safety of the product in the process of transportation.
Q: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.
Q: How to guarantee the quality?
A: Each production procedure will be subject to test and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.
Q: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.
Q: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.
Q: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.
){kind=link}