Hastelloy G3 Nickel Based Alloy Strip for Productions of Sour Gas and Oil

• Customization: Available
• Application: Aviation, Electronics, Industrial, Medical, Chemical
• Standard: JIS, GB, DIN, ASTM, AISI
• Model NO.: Hastelloy G3
• Alloy: Alloy
• Type: Nickel Strip
• Powder: Not Powder
• Thickness: 0.4-8mm
• Width: 1000/1219/1500mm
• Length: as Your Requirments
• MOQ: 100kgs
• Sample: Free-Sample
• Surface: 2b, No.1
• Technique: Cold Rolled, Hot Rolled
• Mtc: En 10204 Type 3.1
• Stock: in Stock
• T.S.(≥ MPa): 752
• Key Words: G3 Nickel Alloy Strip
• Transport Package: Wooden Package
• Specification: Hastelloy G3
• Trademark: ZYTC
• Origin: China
• HS Code: 7502200000
• Production Capacity: 50000kg/Month

Product Description

Introduction

Super alloys or high performance alloys have the ability to function at temperatures above 540ºC (1000ºF) with deformation resistance and high surface stability. As they have good oxidation and creep resistance, super alloys can be commonly forged, rolled to sheet or produced in various shapes. Iron-base, nickel-base and cobalt-base alloys are the major types of super alloys. Nickel-base and cobalt-base super alloys may be cast or wrought based on its composition or application. The iron-base super alloys are generally wrought alloys with stainless steel technology. These alloys can be strengthened by precipitation hardening, work hardening and solid-solution hardening.

HASTELLOY G-3 alloy has high tungsten and molybdenum contents, which makes it resistant to corrosion.

The following section will discuss in detail about HASTELLOY G-3 alloy.

Chemical Composition

The following table shows the chemical composition of HASTELLOY G-3 alloy.

Element	Content (%)
Chromium, Cr	21-23.5
Iron, Fe	18-21
Molybdenum, Mo	6-8
Cobalt, Co	5 max
Copper, Cu	1.5-2.5
Tungsten, W	1.5 max
Silicon, Si	1 max
Manganese, Mn	1 max
Niobium+Tantalum (Ni+Ta)	0.5 max
Phosphorus, P	0.04 max
Sulfur, S	0.03 max
Carbon, C	0.015 max
Nickel, Ni	Remainder

Physical Properties

The physical properties of HASTELLOY G-3 alloy are given in the following table.

Properties	Metric	Imperial
Density	8.3 g/cm³	0.3 lb/in³
Melting point	1343ºC	2450ºF

Other DesignationsASTM B582Equivalent materials to HASTELLOY G-3 alloy are the following:

• ASTM B619
• ASTM B622
• ASTM B626
• DIN 2.4619

Fabrication and Heat Treatment

Machinability

HASTELLOY G-3 alloy can be machined using conventional techniques employed for iron based alloys. The quality of the alloy can be improved with the utilization of water-base coolants. Heavy duty machining tools and equipment can be used prior to cutting in order to reduce chattering or work-hardening of the alloy.

Forming

HASTELLOY G-3 alloy can be formed through conventional forming methods.

Welding

Welding of HASTELLOY G-3 alloy is performed through commonly used welding techniques like gas tungsten arc welding, shielded metal-arc welding, metal-arc welding and submerged-arc welding. However, an alloy filler metal that suits this alloy should be used.

Cold working

HASTELLOY G-3 alloy can be cold worked using standard tooling methods. As plain carbon steels produce galling, they are not preferred for forming HASTELLOY G-3 alloy. Galling can be minimized with the help of heavy duty lubricants.

Annealing

Annealing of HASTELLOY G-3 alloy can be performed at 1177ºC (2150ºF) followed by rapid cooling of air and water quenching.

Hardening

HASTELLOY G-3 alloy can be hardened by cold working.

Applications

HASTELLOY G-3 alloy finds its application in the manufacture of process equipment for mixed acids, sulfate compounds and flue gas scrubbers.

Material	Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
Shape	Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
Grade	Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
	Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc
	Alloy : Alloy 20/28/31
	Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g
	Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665
	Haynes: Haynes 230/556/188
	Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20
	Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816
	Incoloy: Incoloy 800/800H/800HT/825/925/926;
	GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
	Monel: Monel 400/K500/R405
	Nitronic: Nitronic 40/50/60;
	Nimonic: Nimonic 75/80A/90/A263 ;
Specification	Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm  Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Product  Characteristics	1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation  strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..
Standard	GB,AISI,ASTM,DIN,EN,SUS,UNS etc
Inspection	ISO,SGS,BV and so on.
Application	High temperature components such as turbine blades, guide vanes, turbine disks, high pressure compressor disks,machine manufacturing and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines
Packaging	1. cases packed in wooden cases 2. paper packaging 3. plastic packing 4. foam packaging Packaging according to customer requirements or products
Delivery	7-25days or According to the product
Payment	L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirements payments for offline orders.