High Performance Alloy Uns N04405 Monel R405 Nickel Based Alloy Coil for Pickling Bat Heating Coils

• Application: Aviation, Electronics, Industrial, Medical, Chemical
• Standard: JIS, GB, DIN, ASTM, AISI
• Purity: 63%
• Alloy: Alloy
• Type: Nickel Coil
• Powder: Not Powder
• Model NO.: Monel R405
• Thickness: 0.4-8mm
• Width: 1000/1219/1500mm
• Length: as Your Requirments
• MOQ: 100kgs
• Sample: Free-Sample
• Surface: 2b, No.1
• Technique: Cold Rolled, Hot Rolled
• Mtc: En 10204 Type 3.1
• Stock: in Stock
• T.S.(≥ MPa): 550
• Key Words: 404 Nickel Alloy Coil
• Transport Package: Wooden Package
• Specification: Monel R405
• Trademark: ZYTC
• Origin: China
• HS Code: 7502200000
• Production Capacity: 50000kg/Month

Product Description

High Performance Alloy UNS N04405 Monel R405 Nickel Based Alloy Coil for Pickling bat heating coils

Ni 63.0 Cu 31.0 S 0.04 Fe 2.5 Mn 2.0 C 0.3 Si 0.5 S 0.043
 

Material	Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
Shape	Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
Grade	Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
	Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc
	Alloy : Alloy 20/28/31
	Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g
	Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665
	Haynes: Haynes 230/556/188
	Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20
	Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816
	Incoloy: Incoloy 800/800H/800HT/825/925/926;
	GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
	Monel: Monel 400/K500/R405
	Nitronic: Nitronic 40/50/60;
	Nimonic: Nimonic 75/80A/90/A263 ;
Specification	Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm  Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Product  Characteristics	1.According to the preparation process can be divided into deformation superalloys,  casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation  strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..
Standard	GB,AISI,ASTM,DIN,EN,SUS,UNS etc
Inspection	ISO,SGS,BV and so on.
Application	High temperature components such as turbine blades, guide vanes, turbine disks,  high pressure compressor disks,machine manufacturing and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines
Packaging	1. cases packed in wooden cases 2. paper packaging 3. plastic packing 4. foam packaging Packaging according to customer requirements or products
Delivery	7-25days orAccording to the product
Payment	L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirements payments for offline orders.

High Performance Alloys stocks and produces MONEL R405 in this grade in the following forms: Bar, hex bar, fasteners. 

 

OVERVIEW

MONEL R405 is a Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. 
MONEL R405 is a nickel-copper alloy with excellent corrosion resistance in a wide variety of media. MONEL R405 is characterized by good general corrosion resistance and moderate to high strength. MONEL R405 has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. MONEL R405 is slightly magnetic at room temperature. MONEL R405 is widely used in the chemical, oil and marine industries.

 

Characteristics

• Corrosion resistance in an extensive range of marine and chemical environments. From pure water to nonoxidizing mineral acids, salts and alkalis.
• MONEL R405 is more resistant to nickel under reducing conditions and more resistant than copper under oxidizing conditions, it does show however better resistance to reducing media than oxidizing.
• Good mechanical properties from subzero temperatures up to about 480C.
• Good resistance to sulfuric and hydrofluoric acids. Aeration however will result in increased corrosion rates. May be used to handle hydrochloric acid, but the presence of oxidizing salts will greatly accelerate corrosive attack.
• Resistance to neutral, alkaline and acid salts is shown, but poor resistance is found with oxidizing acid salts such as ferric chloride.
• Excellent resistance to chloride ion stress corrosion cracking.

*Due to sulfur addition for free machining, welding is not possible for MONEL R405.

 

Applications

• Feed water and steam generator tubing.
• Brine heaters, sea water scrubbers in tanker inert gas systems.
• Sulfuric acid and hydrofluoric acid alkylation plants.
• Pickling bat heating coils.
• Heat exchangers in a variety of industries.
• Transfer piping from oil refinery crude columns.
• Plant for the refining of uranium and isotope separation in the production of nuclear fuel.
• Pumps and valves used in the manufacture of perchlorethylene, chlorinated plastics.
• Monoethanolamine (MEA) reboiling tube.
• Cladding for the upper areas of oil refinery crude columns.
• Propeller and pump shafts.
   

Chemistry

Chemical Requirements
	Ni	Cu	Fe	S	Mn	C	Si
Max		34.0	2.5	0.060	2.0	0.3	0.5
Min	63.0	28.0		0.025

 

Tensile Data

Mechanical Property Requirements
	Ultimate Tensile	Yield Strength (0.2% OS)	Elong. in 2 in. or 50mm (or 4D) min. %	R/A	Hardness
Cold Worked/SR
Min	85 KSi	50 KSi	15
Max
Min	585 MPa	345 KPa
Max
Hot Worked/SR
Min	75 KSi	35 KSi	30
Max
Min	517 MPa	241 MPa
Max

 

Specifications

Form	Standard
Metal Type	UNS N04405
Bar	ASTM B164 QQ-N-281
Wire
Sheet	ASTM B127 QQ-N-281
Plate	ASTM B127 QQ-N-281
Fitting
Forging	ASTM B564
Weld Wire
Weld Electrode	FM 190/ ENiCu-7

 

 

Machining

 

Machinability Ratings

 

MACHINING DATA
Carbide tools are suggested  For Rates Better Than 50% Of Type 304.
Machining Type	Suggested starting rates are:
Single Point Turning :	Roughing - 0.15" depth, 0.015"/rev feed -175 SFM  Finishing - 0.025" depth, 0.007"/rev feed - 200 SFM
Drilling :	1/4" Dia hole - 0.004"/rev feed - 60 SFM  1/2" Dia hole - 0.007"/rev feed - 60 SFM  3/4" Dia hole - 0.010"/rev feed - 60 SFM
Reaming :	Feed - same as drilling - 100 SFM
Side And Slot Milling :	Roughing - 0.25" depth - 0.007"/tooth feed - 125SFM  Finishing - 0.050" depth - 0.009"/tooth feed - 140SFM
These rates are for carbide tools,  Type C-2 For Roughing, Drilling And Reaming.  Type C-3 For Finishing.

 

Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .