Hot Sale Incoloy 800 Nickel Alloy Strip for Heat Exchangers

• Customization: Available
• Application: Aviation, Electronics, Industrial, Medical, Chemical
• Standard: JIS, GB, DIN, ASTM, AISI
• Model NO.: Incoloy 800
• Alloy: Alloy
• Type: Nickel Strip
• Powder: Not Powder
• Thickness: 0.4-8mm
• Width: 1000/1219/1500mm
• Length: 2000-6000mm
• MOQ: 100kgs
• Sample: Free-Sample
• Surface: 2b, No.1
• Technique: Cold Rolled, Hot Rolled
• Mtc: En 10204 Type 3.1
• Stock: in Stock
• T.S.(≥ MPa): 520
• Key Words: Nickel Alloy
• Transport Package: Wooden Package
• Specification: Incoloy 800
• Trademark: ZYTC
• Origin: China
• HS Code: 7502200000
• Production Capacity: 50000kg/Month

Product Description

Hot Sale Incoloy 800 Nickel Alloy Strip for Heat Exchangers

INCOLOY alloy 800 is an alloy of nickel, iron and chromium. The alloy is capable of remaining stable and maintaining its austenitic structure even after long time exposures to high temperatures. Other characteristics of the alloy are good strength, and high resistance to oxidizing, reducing and aqueous environments. The standard forms in which this alloy is available are round, flats, forging stock, tube, plate, sheet, wire and strip.

 

UNS,ASTM	No8800,N08800	Incoloy800
DIN,EN	1.4876	X10NiCrAlTi32-20
GB	GH1180
GB	NS111	0Cr20Ni32Fe

 

Chemical Compostion(%)

%	C	Si	Mn	Cr	Ni	Al	Ti	Cu	P	S	Fe
Min	-	-	-	19.0	30.0	0.15	0.15	-	-	-	0.15
Max	0.1	1.0	1.5	23.0	35.0	0.6	0.6	0.75	0.03	0.015

Physical Properties

The following table discusses the physical properties of INCOLOY alloy 800.

Properties	Metric	Imperial
Density	7.94 gm/cm^3	0.287 lb/in^3

Mechanical Properties

The mechanical properties of INCOLOY alloy 800 are tabulated below.

Properties	Metric	Imperial
Tensile strength(annealed)	600 MPa	87 ksi
Yield strength(annealed)	275 MPa	39.9 ksi
Elongation at Break	45%	45%

Other Designations

Some of the designations used to denote INCOLOY alloy 800 are listed below:

UNS N08800	AMS 5766	AMS 5871	ASTM B163	ASTM B366
ASTM B407	ASTM B408	ASTM B409	ASTM B514	ASTM B515
ASTM B564	DIN 1.4876

Fabrication

Machinability

Machining characteristics of this INCOLOY alloy 800 are similar to that of iron-based alloys. This alloy tends to work-harden during machining.

Welding

INCOLOY alloy 800 can be welded by common welding techniques, using a matching filler metal.

Forming

This alloy exhibits good ductility and hence can be formed using conventional methods.

Hot working

INCOLOY alloy 800 can be hot worked at temperature ranges of 871-1232°C (1600-2250°F).

Cold Working

Cold working may be done on the alloy using standard tooling.

Annealing

INCOLOY alloy 800 may be annealed after cold working. Annealing should be done at 982°C (1800°F) for 15 min and then the alloy should be air cooled.

Applications

INCOLOY alloy 800 is used in the following applications:

• Heat exchangers
• Carburising equipment
• Heating elements
• Sheathing and nuclear steam generator tubing
•  

Material	Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
Shape	Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
Grade	Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
	Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc
	Alloy : Alloy 20/28/31
	Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g
	Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665
	Haynes: Haynes 230/556/188
	Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20
	Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816
	Incoloy: Incoloy 800/800H/800HT/825/925/926;
	GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
	Monel: Monel 400/K500/R405
	Nitronic: Nitronic 40/50/60;
	Nimonic: Nimonic 75/80A/90/A263 ;
Specification	Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm  Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Product  Characteristics	1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation  strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..
Standard	GB,AISI,ASTM,DIN,EN,SUS,UNS etc
Inspection	ISO,SGS,BV and so on.
Application	High temperature components such as turbine blades, guide vanes, turbine disks, high pressure compressor disks,machine manufacturing and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines
Packaging	1. cases packed in wooden cases 2. paper packaging 3. plastic packing 4. foam packaging Packaging according to customer requirements or products
Delivery	7-25days or According to the product
Payment	L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirements payments for offline orders.