High-Quality T8 Aluminum Alloy Rods for Diverse Uses

Product Description

7A03 aluminum is an aluminum alloy that belongs to the 7000 series. Although it is not as widely known or used as some other alloys in the 7000 series, it still possesses certain characteristics and applications worth discussing.

Here are some key features and characteristics of 7A03 aluminum bar:

1. Composition: 7A03 aluminum primarily consists of approximately 90.7% aluminum, along with small amounts of zinc (5.1-6.1%), magnesium (1.9-2.9%), and copper (1.2-2.0%). These alloying elements contribute to the alloy's strength, hardness, and other desirable properties.

2. High Strength: 7A03 aluminum exhibits high strength, making it suitable for applications that require structural integrity and load-bearing capabilities. It has a tensile strength of around 500 MPa (73 ksi) and a yield strength of approximately 400 MPa (58 ksi).

3. Heat Treatable: 7A03 aluminum is a heat-treatable alloy, which means it can be strengthened through heat treatment processes such as solution heat treatment and aging. This allows for further enhancement of its mechanical properties, including strength and hardness.

4. Corrosion Resistance: 7A03 aluminum offers moderate corrosion resistance. It is less corrosion-resistant than some other aluminum alloys, such as those from the 5000 series. Therefore, protective coatings or surface treatments may be applied to enhance its resistance to corrosion in specific environments.

5. Weldability: 7A03 aluminum has good weldability, allowing it to be joined using various welding techniques. However, it is recommended to use appropriate welding procedures and filler materials to ensure proper weld quality and mechanical properties.

6. Applications: Due to its high strength and other favorable properties, 7A03 aluminum bar can find applications in industries such as aerospace, transportation, and structural engineering. It may be used in the production of aircraft structures, automotive components, high-strength structural parts, and other similar applications where strength and durability are crucial.

It's worth noting that specific properties and applications of 7A03 aluminum may vary depending on factors such as temper and processing conditions. If you have any further questions or require more detailed information about 7A03 aluminum or its specific applications, I recommend consulting with reputable aluminum suppliers or manufacturers who can provide you with accurate and up-to-date information.

Aluminum Bar/ Aluminum Rod Available Sizes & Specifications:

Product Name	Aluminum bar, Aluminium rod
Shape	Round, Square, Flat, Rectangular, Hexagonal, etc.
Standard	ASTM B221, GB/T 3191-2019, etc.
Diameter	5-600mm or as required
Length	1-6m or as required
Surface	Oxidation, Mill, Bright, Polished
Process	Fine drawing (cold drawing), Extruded, Forging
Temper	O-H112, T3-T8, T351-851
Grade	1000 Series: 1050, 1060, 1070, 1100, 1199, 1200, 1235, etc. 2000 Series: 2011, 2014, 2017, 2024, etc. 3000 Series: 3003, 3004, 3005, 3104, 3105, 3A21, etc. 5000 Series: 5005, 5052, 5083, 5086, 5154, 5182, 5251, 5754, etc. 6000 Series: 6101, 6003, 6061, 6063, 6020, 6201, 6262, 6082, etc. 7000 Series: 7003, 7005, 7050, 7475, 7075, etc.
Loading port	Tianjin Port In China
payment terms	L/C, D/A, D/P, T/T, West Union, etc.
Application	1. Food industry containers 2. Building flash 3. Cable sheath 4. Light reflector 5. Chemical processing plant equipment
Kind attention	The specifications can be customized according to customer requirements.

 

 Aluminum Round Bar

* Diameter:3-800mm
* Length: as requirements
* Temper:  O-H112,T3-T8, T351-851
* Technique: Extruded, Cold Drawn, Cut From Plate
* Surface: Powder coating, Electrophoresis, Wood grain, Anodized, e 
* Standard:  GB/T 3190-2008, GB/T 3880-2006, ASTM B209, JIS H4000-2006, etc
*Grade: 
1000 Series: 1050, 1060, 1070, 1100, 1199, 1200, 1235, etc.
2000 Series: 2011, 2014, 2017, 2024, etc.
3000 Series: 3003, 3004, 3005, 3104, 3105, 3A21, etc.
5000 Series: 5005, 5052, 5083, 5086, 5154, 5182, 5251, 5754, etc.
6000 Series: 6101, 6003, 6061, 6063, 6020, 6201, 6262, 6082, etc.
7000 Series: 7003, 7005, 7050, 7475, 7075, etc.
*Deep Process: CNC, drilling, milling, cutting, welding, bending, assembling
PLEASE CONTACT THE SALES TEAM FOR THE MOLD LIST

 Aluminum Flat Bar

* Width: 10.0mm - 200.0 mm
* Thickness: 2.0mm - 200.0 mm
* Length: as requirements
* Temper:  O-H112,T3-T8, T351-851
* Technique: Extruded, Cold Drawn, Cut From Plate
* Surface: Powder coating, Electrophoresis, Wood grain, Anodized, e 
* Standard:  GB/T 3190-2008, GB/T 3880-2006, ASTM B209, JIS H4000-2006, etc
*Grade: 1000 Series: 1060,
2000 Series: 2014, 2024, etc.
3000 Series: 3003, etc.
5000 Series: 5052, 5083, 5086, etc.
6000 Series: 6061, 6063, 6082, etc.
7000 Series: 7003, 7050, etc.
*Deep Process: CNC, drilling, milling, cutting, welding, bending, assembling
PLEASE CONTACT THE SALES TEAM FOR THE MOLD LIST

Aluminum Angle Bar

* Classification: Equal aluminum angle bar, unequal aluminum angle bar
* Width: 10*10mm - 150*150mm
* Thickness: 1.0mm - 10mm
* Length: as requirements
* Temper:  T3-T8
* Technique: Extruded, Cold Drawn, Bending From Sheet
* Surface: Powder coating, Electrophoresis, Wood grain, Anodized, e 
* Standard:  GB/T 3190-2008, GB/T 3880-2006, ASTM B209, JIS H4000-2006, etc
*Grade: 6061, 6063, 6060, 6005, 6005A, etc.
*Deep Process: CNC, drilling, milling, cutting, welding, bending, assembling
PLEASE CONTACT THE SALES TEAM FOR THE MOLD LIST

Aluminum Square Bar

* Width: 10*10mm - 200*200mm
* Length: as requirements
* Temper:  O-H112,T3-T8, T351-851
* Technique: Extruded, Cold Drawn
* Surface: Powder coating, Electrophoresis, Wood grain, Anodized, e 
* Standard:  GB/T 3190-2008, GB/T 3880-2006, ASTM B209, JIS H4000-2006, etc
*Grade: 2000 Series: 2014, 2024
5000 Series: 5052, 5083, 5086
6000 Series: 6061, 6063, 6082
7000 Series: 7003, 7050 
*Deep Process: CNC, drilling, milling, cutting, welding, bending, assembling
PLEASE CONTACT THE SALES TEAM FOR THE MOLD LIST

Aluminum Hexagonal Rod

* Width: 10*10mm - 200*200mm
* Length: as requirements
* Temper:  O-H112,T3-T8, T351-851
* Technique: Extruded, Cold Drawn
* Surface: Powder coating, Electrophoresis, Wood grain, Anodized, e 
* Standard:  GB/T 3190-2008, GB/T 3880-2006, ASTM B209, JIS H4000-2006, etc
*Grade: 2000 Series: 2014, 2024
5000 Series: 5052, 5083, 5086
6000 Series: 6061, 6063, 6082
7000 Series: 7003, 7050 
*Deep Process: CNC, drilling, milling, cutting, welding, bending, assembling
PLEASE CONTACT THE SALES TEAM FOR THE MOLD LIST

Q: What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.

Q: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.

Q: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.

Q: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, Outokumpu, etc.

Q: What are your company's payment methods?
 A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices. 

Q: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.

Q: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack it in wooden cases to ensure the safety of the product in the process of transportation.

Q: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.

Q: How to guarantee the quality?
 A: Each production procedure will be subject to testing and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.

Q: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.

Q: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.

Q: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.