Super Alloy Nimonic 90 (UNS N07090) Nickel Alloy 90 Sheet

• Customization: Available
• Application: Aviation, Electronics, Industrial, Medical, Chemical
• Standard: JIS, GB, DIN, BS, ASTM, AISI
• Model NO.: Nimonic 90
• Purity: 20
• Alloy: Alloy
• Type: Nickel Plate
• Powder: Not Powder
• Thickness: 0.4-8mm
• Width: 1000/1219/1500mm
• Length: 2000-6000mm
• MOQ: 100kgs
• Sample: Free-Sample
• Surface: 2b/No.1
• Technique: Cold Rolled, Hot Rolled
• Mtc: En 10204 Type 3.1
• Stock: in Stock
• T.S.(≥ MPa): 752
• Key Words: Nimonic 90 Alloy Plate
• Transport Package: Wooden Package
• Specification: nimonic 90
• Trademark: ZYTC
• Origin: China
• HS Code: 7506200000
• Production Capacity: 50000kg/Month

Product Description

 

Super Alloy Nimonic 90 (UNS N07090) Nickel Alloy 90 Sheet

Shape	Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
Grade	Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
	Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc
	Alloy : Alloy 20/28/31
	Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g
	Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665
	Haynes: Haynes 230/556/188
	Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20
	Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816
	Incoloy: Incoloy 800/800H/800HT/825/925/926;
	GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
	Monel: Monel 400/K500/R405
	Nitronic: Nitronic 40/50/60;
	Nimonic: Nimonic 75/80A/90/A263 ;
Specification	Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm  Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm

Introduction

NIMONIC alloy 90 (UNS N07090/W. Nr. 2.4632) is a wrought nickel-chromium-cobalt base alloy strengthened by additions of titanium and aluminum. It has been developed as an age-hardenable creep- resisting alloy for service at temperatures up to 920°C (1688°F.
 

Nominal Composition

Ni: balance
Cr: 18.0 - 21.0
Co: 15.0 - 21.0
Fe: 3.0 max
Ti: 1.8 - 3.0
Al: 0.8 - 2.0
Mn: 1.0 max
Si: 1.5 max
C: 0.13 max

Physical Properties

Density: 0.296 lb/in³, (8.18 g/cm³)

Modulus of Elasticity (E):
At 70°F (20°C): 32.0 x 106 psi (220 GPa)
At 1000°F (538°C): 27.0 x 106 psi (185 GPa)

Modulus of Rigidity (G):
At 70°F (20°C): 11.9 x 10³ psi (82.0 Gpa)

Coefficient of Expansion:
8.2 µin/in.-°F (70°F to 1000°F)
14.8 µm/m-°C (20°C to 538°C)

Electrical Resistivity: 46.5 µΩ.in, (118 µΩ.cm)

Thermal Conductivity: 80 Btu-in/ft²hr-°F, (11.5 W/m-K)

Applicable Specifications

Wire & Bar: AMS 5829, BS HR 501, BS HR 502, BS HR 503, BS 3075- NA19, NACE MR0175 / ISO 15156-3, NACE MR0103

Typical Mechanical Properties - Spring Applications

• Solution Treated
  • Heat Treatment: 1922 - 2012°F (1050 - 1100°C) + WQ
  • Tensile Strength: 157 ksi max; (1080 MPa) max
• Spring Temper
  • Heat Treatment: As supplied condition.
  • Tensile Strength: 189 - 223 ksi; (1300-1540 MPa)
• Spring Temper + Aged
  • Heat Treatment: After spring coiling. Age: 1202°F (650°C) for 4 hours. Alternatively, Age at 1112°F(600°C) for 16 hours and air cool.
  • Tensile Strength: 189 - 260 ksi; (1300 - 1800 MPa)
  • Suggested Operating Conditions: Optimum stress and low relaxation at temperatures up to 700°F (371°C)
• Solution Treated + Aged
  • Heat Treatment: After spring coiling: Solution Heat Treat: 1976°F (1080°C) followed by rapid cooling + Age at 1382°F (750°C) for 4 hours and air cool. Alternatively, Age at 1292°F (700°C) for 16 hours and air cool
  • Tensile Strength: 145 - 203 ksi; (1080 - 1400 MPa)
  • Suggested Operating Conditions: Optimum resistance to relaxation at temperatures up to 1112°F (600°C)

Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now"  or send us email with detail specifications,you will get the official price list in 1 hour .