S32550 is also called FERRALIUM 255, F61. It is finding many cost effective applications in the chemical, marine, metallurgical, municipal sanitation, plastics, oil and gas, petrochemical, pollution control, wet phosphoric acid, paper making and metalworking industries. Called "super" because it is more alloyed than ordinary stainless steels and has superior corrosion resistance, FERRALIUM 255 is being used in areas where conventional stainless' are inadequate or, at best marginal. One good example s in the paper industry which was hit with an epidemic of corrosion problems when environmental laws forced recycling of process liquids In closed systems, chemicals such as chlorides can build up to highly corrosive concentrations over time. Paper makers have found that ordinary stainless equipment, which had previously given good service, was no longer adequate for many applications.
FERRALIUM 255 is a duplex alloy with a high strength to weight ratio with superior abrasion and cavitation resistance. Resistance to chloride SCC, as well as crevice corrosion and pitting. Good ductility with a high fatigue strength in marine applications. Twice the yield strength of Alloy 20, and stronger than Duplex 2205. An excellent 40°C critical pitting temperature (ASTM G48-Method A), twice that of Alloy 2205.
S32550 Stainless Steel Chemical Composition:
| |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Cu |
N |
Pren |
| Min |
|
|
|
|
|
24.0 |
4.5 |
2.9 |
1.5 |
0.1 |
40 |
| Max |
0.04 |
1.0 |
1.5 |
0.04 |
0.03 |
27.0 |
6.5 |
3.9 |
2.5 |
0.25 |
|
(PREN = % Cr + 3.3% Mo + 16% N)
S32550 Stainless Steel Mechanical Properties:
Condition: Solution Annealed and Water Quenched.
| U.T.S |
110 KSI Min |
(760 N/mm2) |
| 0.2% Proof of Stress |
80 KSI Min |
(550 N/mm2) |
| Elongation |
15 % |
|
| CVN Impacts @ -46°C (-50°F) |
45 Joules |
(33 ft-lbf) |
S32550 Stainless Steel Applications:
FERRALIUM 255 is a cost effective alternative to materials such as the nickel alloys, 20 type alloys, brass and bronze. Marine environments have long been the domain of admiralty bronze. Alloy 255 is replacing admiralty bronze, and the nickel alloys, in offshore platforms, deck hardware, rudders and shafting.
Alloy 255 is also making inroads in "borderline" corrosion applications where the nickel alloys and high performance alloys have been used but may not have been absolutely necessary. In some instances, it has even been used to replace high performance Ni-Cr-Mo-F-Cu alloys in the phosphoric acid industry.
Valves, pumps, shafts, marine environments, Applications in down-hole, wastewater, polycarbonate production, and demineralized water production.
Cold Rolled Stainless Steel Sheet
* Thickness: 0.3mm - 16.0mm
* Width: 1000mm, (4′)1220mm, 1500mm, 1800mm, 2000mm
* Length: Cut as per customer's requirements
* Standard Size: 1000*2000mm, 1219*2438mm, 1220*2440mm, 1250*2500mm, 1500*3000mm, 1500*6000mm, 1800*6000mm, 2000*6000mm, 4'*8'
* Edge: Mill Edge/Slit Edge
* Technique: Cold Rolled
* Surface: 2B/BA/HL/8K mirror/BA/2D/ Titanium coating with Filim
* Standard: ASTM A240/A480M, ASTM B443/SB443, ASTM B625, B709, B618, B435, ASTM A480, A895, A693, DIN 10088, EN 10028, JIS G4304, JIS G4305, etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
* Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.
Hot Rolled Stainless Steel Plate
* Thickness: 3.0mm - 300mm
* Width: 1000mm, (4′)1220mm, 1500mm, 1800mm, 2000mm-3000mm
* Length: Produce as per customer's requirements
* Standard Size: 1000*2000mm, 1219*2438mm, 1220*2440mm, 1250*2500mm, 1500*3000mm, 1500*6000mm, 1800*6000mm, 2000*6000mm, 4'*8'
* Edge: Mill Edge/Slit Edge
* Technique: Hot Rolled
* Surface: No.1/1D/Pickling
* Standard: ASTM A240/A480M, ASTM B443/SB443, ASTM B625, B709, B618, B435, ASTM A480, A895, A693, DIN 10088, EN 10028, JIS G4304, JIS G4305, etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
* Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.
Cold Rolled Stainless Steel Coil
* Thickness: 0.4mm - 6.0mm
* Width: 1000mm, (4′)1220mm, 1500mm, 2000mm
* Length: Depends on Coil Weight
* Standard Size: 1000*C, 1219*C, 1220*C, 1250*C, 1500*3000mm, 1500*C, 1800*C, 2000*C, 4'*C
* Edge: Mill Edge/Slit Edge
* Technique: Cold Rolled
* Surface: 2B/No.4/HL/8K/BA
* Standard: ASTM A240/A480M, ASTM B443/SB443, ASTM B625, B709, B618, B435, ASTM A480, A895, A693, DIN 10088, EN 10028, JIS G4304, JIS G4305, etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
* Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.
Hot Rolled Stainless Steel Coil
* Thickness: 3.0mm - 16mm
* Width: 1000mm, (4′)1220mm, 1500mm, 1800mm, 2000mm,2200mm
* Length: Depends on Coil Weight
Standard Size: 1000*C, 1219*C, 1220*C, 1250*C, 1500*3000mm, 1500*C, 1800*C, 2000*C, 4'*C
* Edge: Mill Edge/Slit Edge
* Technique: Hot Rolled
* Surface: No.1/1D
* Standard: ASTM A240/A480M, ASTM B443/SB443, ASTM B625, B709, B618, B435, ASTM A480, A895, A693, DIN 10088, EN 10028, JIS G4304, JIS G4305, etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
* Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.
Cold Rolled Stainless Steel Strip
* Thickness: 0.002mm - 3.0mm
* Width: 5mm - 900mm
* Length: Depends on Coil Weight
* Edge: Slit Edge
* Technique: Cold Rolled
* Surface: 2B/BA/HL/8K mirror/BA/2D
* Standard: ASTM A240/A480M, ASTM B443/SB443, ASTM B625, B709, B618, B435, ASTM A480, A895, A693, DIN 10088, EN 10028, JIS G4304, JIS G4305, etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
Hot Rolled Stainless Steel Strip
* Thickness: 0.002mm - 16.0mm
* Width: 5mm - 900mm
* Length: Depends on Coil Weight
* Edge: Slit Edge
* Technique: Hot Rolled
* Surface: 1D/Pickling
* Standard: ASTM A240/A480M, ASTM B443/SB443, ASTM B625, B709, B618, B435, ASTM A480, A895, A693, DIN 10088, EN 10028, JIS G4304, JIS G4305, etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc
Hot Rolled Stainless Steel Checkered Plate
* Thickness: 1.0mm - 10mm
* Width: 600mm - 1800mm
* Length: 2000mm - 6000mm
* Edge: Mill Edge/Slit Edge
* Technique: Hot Rolled
* Surface: No.1/1D/Pickling
* Standard: ASTM A240/A480
* Grade: 304, 316L, 430
* Pattern: Chequered pattern, diamond pattern, lentils pattern, leaves pattern, etc.
Q: What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.
Q: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.
Q: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.
Q: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, etc.
Q: What are your company's payment methods?
A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices.
Q: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.
Q: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack them in wooden cases to ensure the safety of the product in the process of transportation.
Q: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.
Q: How to guarantee the quality?
A: Each production procedure will be subject to testing and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.
Q: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.
Q: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.
Q: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.
S32550 is also called FERRALIUM 255, F61. It is finding many cost effective applications in the chemical, marine, metallurgical, municipal sanitation, plastics, oil and gas, petrochemical, pollution control, wet phosphoric acid, paper making and metalworking industries. Called "super" because it is more alloyed than ordinary stainless steels and has superior corrosion resistance, FERRALIUM 255 is being used in areas where conventional stainless' are inadequate or, at best marginal. One good example s in the paper industry which was hit with an epidemic of corrosion problems when environmental laws forced recycling of process liquids In closed systems, chemicals such as chlorides can build up to highly corrosive concentrations over time. Paper makers have found that ordinary stainless equipment, which had previously given good service, was no longer adequate for many applications.
){kind=link}