Stainless steel Super Duplex 2507 is designed to handle highly corrosive conditions and situations were high strength is required. High molybdenum, chromium, and nitrogen content in Super Duplex 2507 help the material withstand pitting and crevice corrosion. The material is also resistant to chloride stress corrosion cracking, erosion corrosion, corrosion fatigue, to general corrosion in acids. This alloy has good weldability and very high mechanical strength.
- ASTM/ASME ...…. A240 - UNS S32750
- EURONORM...... 1.4410 - X2 Cr Ni MoN 25.7.4
- AFNOR......... Z3 CN 25.06 Az
S32750 Stainless Steel Chemical Composition:
| Element |
Content (%) |
| Chromium, Cr |
24 - 26 |
| Nickel, Ni |
6 - 8 |
| Molybdenum, Mo |
3 - 5 |
| Manganese, Mn |
1.20 max |
| Silicon, Si |
0.80 max |
| Copper, Cu |
0.50 max |
| Nitrogen, N |
0.24 - 0.32 |
| Phosphorous, P |
0.035 max |
| Carbon, C |
0.030 max |
| Sulfur, S |
0.020 max |
| Iron, Fe |
Balance |
S32750 Stainless Steel Mechanical Properties:
| Ultimate Tensile Strength, ksi |
116 min. |
| 0.2% Offset Yield Strength 0.2%, ksi |
80 min. |
| 0.1% Offset Yield Strength 0.2%, ksi |
91 min. |
| Elongation in 2 inches, % |
15 min. |
| Hardness Rockwell C |
32 max. |
| Impact Energy, ft.-lbs. |
74 min. |
S32750 Stainless Steel Applications:
- Oil and gas industry equipment
- Offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, injection and ballast water systems
- Chemical process industries, heat exchangers, vessels, and piping
- Desalination plants, high pressure RO-plant and seawater piping
- Mechanical and structural components, high strength, corrosion-resistant parts
- Power industry FGD systems, utility and industrial scrubber systems, absorber towers, ducting, and piping
Cold Rolled Stainless Steel Sheet
* Thickness: 0.3mm - 16.0mm
* Width: 1000mm, (4′)1220mm, 1500mm, 1800mm, 2000mm
* Length: Cut as per customer's requirements
* Standard Size: 1000*2000mm, 1219*2438mm, 1220*2440mm, 1250*2500mm, 1500*3000mm, 1500*6000mm, 1800*6000mm, 2000*6000mm, 4'*8'
* Edge: Mill Edge/Slit Edge
* Technique: Cold Rolled
* Surface: 2B/BA/HL/8K mirror/BA/2D/ Titanium coating with Filim
* Standard: ASTM A240/A480M, ASTM B 668, ASTM B168/SB168, ASTM B443/SB443, JIS G4303, G4305, BS 1449, DIN 17441 etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
* Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.
Hot Rolled Stainless Steel Sheet
* Thickness: 3.0mm - 300mm
* Width: 1000mm, (4′)1220mm, 1500mm, 1800mm, 2000mm-3000mm
* Length: Produce as per customer's requirements
* Standard Size: 1000*2000mm, 1219*2438mm, 1220*2440mm, 1250*2500mm, 1500*3000mm, 1500*6000mm, 1800*6000mm, 2000*6000mm, 4'*8'
* Edge: Mill Edge/Slit Edge
* Technique: Hot Rolled
* Surface: No.1/1D/Pickling
* Standard: ASTM A240/A480M, ASTM B 668, ASTM B168/SB168, ASTM B443/SB443, JIS G4303, G4305, BS 1449, DIN 17441 etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
* Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.
Cold Rolled Stainless Steel Coil
* Thickness: 0.4mm - 6.0mm
* Width: 1000mm, (4′)1220mm, 1500mm, 2000mm
* Length: Depends on Coil Weight
* Standard Size: 1000*C, 1219*C, 1220*C, 1250*C, 1500*3000mm, 1500*C, 1800*C, 2000*C, 4'*C
* Edge: Mill Edge/Slit Edge
* Technique: Cold Rolled
* Surface: 2B/No.4/HL/8K/BA
* Standard: ASTM A240/A480M, ASTM B 668, ASTM B168/SB168, ASTM B443/SB443, JIS G4303, G4305, BS 1449, DIN 17441 etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
* Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.
Hot Rolled Stainless Steel Coil
* Thickness: 3.0mm - 16mm
* Width: 1000mm, (4′)1220mm, 1500mm, 1800mm, 2000mm,2200mm
* Length: Depends on Coil Weight
Standard Size: 1000*C, 1219*C, 1220*C, 1250*C, 1500*3000mm, 1500*C, 1800*C, 2000*C, 4'*C
* Edge: Mill Edge/Slit Edge
* Technique: Hot Rolled
* Surface: No.1/1D
* Standard: ASTM A240/A480M, ASTM B 668, ASTM B168/SB168, ASTM B443/SB443, JIS G4303, G4305, BS 1449, DIN 17441 etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
* Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.
Cold Rolled Stainless Steel Strip
* Thickness: 0.002mm - 3.0mm
* Width: 5mm - 900mm
* Length: Depends on Coil Weight
* Edge: Slit Edge
* Technique: Cold Rolled
* Surface: 2B/BA/HL/8K mirror/BA/2D
* Standard: ASTM A240/A480M, ASTM B 668, ASTM B168/SB168, ASTM B443/SB443, JIS G4303, G4305, BS 1449, DIN 17441 etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc.
Hot Rolled Stainless Steel Strip
* Thickness: 0.002mm - 16.0mm
* Width: 5mm - 900mm
* Length: Depends on Coil Weight
* Edge: Slit Edge
* Technique: Hot Rolled
* Surface: 1D/Pickling
* Standard: ASTM A240/A480M, ASTM B 668, ASTM B168/SB168, ASTM B443/SB443, JIS G4303, G4305, BS 1449, DIN 17441 etc.
*Grade: 201, 301, 304, 304L, 316, 316L, 316Ti, 321, 317L, 310S, 347H, 410, 420, 409L, 430, 440C, 444, 441, S32760, 2205, 904L, 630, 631, 253Ma, 254SMo, Incoloy 926, Inconel 625, Monel 400 etc
Hot Rolled Stainless Steel Checkered Plate
* Thickness: 1.0mm - 10mm
* Width: 600mm - 1800mm
* Length: 2000mm - 6000mm
* Edge: Mill Edge/Slit Edge
* Technique: Hot Rolled
* Surface: No.1/1D/Pickling
* Standard: ASTM A240/A480
* Grade: 304, 316L, 430
* Pattern: Chequered pattern, diamond pattern, lentils pattern, leaves pattern, etc.
Q: What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.
Q: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.
Q: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.
Q: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, etc.
Q: What are your company's payment methods?
A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices.
Q: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.
Q: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack them in wooden cases to ensure the safety of the product in the process of transportation.
Q: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.
Q: How to guarantee the quality?
A: Each production procedure will be subject to testing and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.
Q: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.
Q: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.
Q: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.
Audited Supplier 
){kind=link}
){kind=link}