1: Brief Introduction Of 5005 aluminum
Aluminium / Aluminum 5005 alloy is a non-heat treatable alloy with small amount of magnesium content. It has excellent corrosion resistance and weldability characteristics. The following datasheet will provide more details about Aluminium / Aluminum 5005 alloy.
Machinability:
Aluminium / Aluminum 5005 alloy has poor machinability in the soft temper conditions. However, the alloy can be machined, but is a lot tougher than many of the other aluminum alloys. The alloy in the harder tempers such as H34 and H38 can be machined better than the alloy in the soft temper condition.
Forming:
Formability of Aluminium / Aluminum 5005 alloy, especially in the softer tempers, can be easily achieved using conventional methods.
Welding:
Aluminium / Aluminum 5005 alloy has excellent welding capacity. Welding is possible using all the commercial methods. Filler metal of the same alloy has to be used. Welding using resistance method of the O or annealed temper material requires some trial and error determination.
Heat Treatment:
Aluminium / Aluminum 5005 alloy cannot be heat treated, except when annealed to minimize cold working strain.
Forging:
Aluminium / Aluminum 5005 alloy is forgeable.
Hot Working:
Aluminium / Aluminum 5005 alloy does not require hot working in most cases. But if it is required the preferable temperature range is 371 to 204°C (700 to 400°F).
Cold Working:
Aluminium / Aluminum 5005 alloy has excellent cold working capacity including the harder tempers.
Annealing:
Annealing can be performed at 343°C (650°F) if required. This should be followed by air cooling.
Hardening:
Aluminium / Aluminum 5005 alloy can be hardened only by cold working.
Applications:
Aluminium / Aluminum 5005 alloy is widely used in the manufacture of the following products:
Small boats
Appliances
Utensils
Gas lines
Refrigerator panels
Fresh and salt water
The 5005 alloy can also used in architectural parts and as an electrical conductor. It is very useful to avoid excessive finishing costs when using the 3003 alloys due to surface roughness while drawing.
2: Chemical Composition
The aluminum industry has created a system using a four-digit numerical designation to identify wrought aluminum alloys. The first digit indicates the major alloying element. The second digit indicates whether there was a modification in the basic alloy. The third and fourth digit indicates the specific alloy. The following represent the various groups:
| 1XXX |
Aluminum 99% or greater |
| 2XXX |
Copper - major alloying element |
| 3XXX |
Manganese - major alloying element |
| 5XXX |
Magnesium - major alloying element |
| 6XXX |
Magnesium and silicon - major alloying elements |
| 7XXX |
Zinc -major alloying element |
Aluminum Grades:
1000 series: 1035,1040,1050,1060,1070,1080,1090,1098,1100,1230,1435,1260,1170,1275,1285,1385
2000 series: 2001,2002,2011,2014,2017,2117,2218,2519,2024,2224,2025,2030,2031,2036,2090,2091
3000 series: 3002,3003,3004,3103,3203,3303,3105,3006,3007,3107,3008,3009,3015,3016
5000 series: 5005,5205,5006,5010,5013,5014,5016,5017,5040,5043,5050,5150,5251,5351,5451,5052,5083
5352,5552,5254,5754,5856,5456,5283
6000 series: 6101,6201,6003,6103,6105,6205,6006,6106,6110,6061,6060,6063,6863,6081,6082,6162,6863
7000 series: 7001,7003,7005,7108,7129,7146,7050,7472,7075,7076,7277,7178,7278,7091,7277
8000 series: 8001,8004,8006,8011,8111,8014,8030,8130,8177,8079,8081,8280,8091
3: Aluminum Plate/Coil/Flat Sheet Process
4: Aluminum Alloy Plate/Flat Sheet Package
5: About us
Tianjin Zhongyantiancheng Steel Co.,Ltd(short for ZYTC ) is a professional manufacturer and exporter of steel products in China, located in Tianjin Beichen District, having the biggest port in North China.
With 20 years of development, the group has become the leader in steel, product variety, complete specifications and so on in North China market, large inventories more than 100,000 tons are maintained all the time.
ZYTC is specialized in steel products, especially Stainless steel pipe,Stainless steel bar,Stainless steel plate, Round bar(SHOUGANG,DAYE), Spiral pipe(LIDA), Aluminum steel plate,Aluminum pipe ,Copper and so on .
ZYTC has cooperated with Tianjin Seamless Steel Tube Plant(TPCO), Baotou Steel Pipe Plant, Chengdu Steel Pipe Plant, Anshan Steel Pipe Plant,Baoshan Steel Pipe Plant and other steel pipe plants.Round bar cooperated with Beijing shougang goup,Tonggang steel group, Daye steel bar group ,Benxi bengang group an so on , Baotai titanium group,Baoji Lixing group,Stainless steel plate cooperated with Shanxi TAIGANG Steel Plate grouop,Baogang group,Shanghai Kelubo group ,and Puxiang steel group. all these corporations mentioned above are our shareholder partners.
ZYTC principle is: supplying the best products and service,being the best supplier.
The company can make steel product according to particular specifications and materials. ZYTC will perfect our quality management system and supply products of high quality to our customers.
We are all looking forward to establishing business relationships with customers all over the world!
6: Why choose us
* More than 15 years experience in stainless and aluminum steel fields.
* Samples available.
* Specialist metallurgic advice and flexible service.
* High level of expertise, in-depth product knowledge.
* Competitive price, high quality,rich experiences and high reputation
* Delivered on time.
* Good after-sale service.
* Well recognized and trusted by customers.
7: Contact Us
Audited Supplier 
){kind=link}
){kind=link}