Professional Customized Size Aluminum Grade 5000 Series 5005/5052/5082/5083 H32 H16 Anodizing Aluminium Alloy Sheet Plate

• Color: Silver
• Application: Transportation Tools, Door & Window, Glass Wall, Decorations, Small Boats, Appliances, Gas Lines, Utensils
• Certification: ISO9001, ASTM, ASTMB
• Technique: Extruded
• Grade: 5000 Series
• Temper: O - H112
• Model NO.: 5005 5052 5082 5083
• Surface Treatment: Mill Finish
• Alloy: Alloy
• Thickness: 0.1mm to 400mm
• Width: 1000mm to 2200mm
• Length: up to 6 Meters
• Tolerance: +/-0.02mm
• Mtc: En 10204/3.1
• Standard: ASTM B209, ISO 6361, En573-1 etc.
• Keyword: 5005 Aluminum Sheet
• MOQ: 1 Ton
• Transport Package: as Customer′s Requirement
• Trademark: ZYTC
• Origin: China
• HS Code: 76042990
• Production Capacity: 500 Tons/Month

Product Description

Product Description

Aluminium / Aluminum 5005 alloy is a non-heat treatable alloy with small amount of magnesium content. It has excellent corrosion resistance and weldability characteristics. The following datasheet will provide more details about Aluminium / Aluminum 5005 alloy.

Machinability:
Aluminium / Aluminum 5005 alloy has poor machinability in the soft temper conditions. However, the alloy can be machined, but is a lot tougher than many of the other aluminum alloys. The alloy in the harder tempers such as H34 and H38 can be machined better than the alloy in the soft temper condition.

Forming:
Formability of Aluminium / Aluminum 5005 alloy, especially in the softer tempers, can be easily achieved using conventional methods.

Welding:
Aluminium / Aluminum 5005 alloy has excellent welding capacity. Welding is possible using all the commercial methods. Filler metal of the same alloy has to be used. Welding using resistance method of the O or annealed temper material requires some trial and error determination.

Heat Treatment:
Aluminium / Aluminum 5005 alloy cannot be heat treated, except when annealed to minimize cold working strain.

Forging:
Aluminium / Aluminum 5005 alloy is forgeable.

Hot Working:
Aluminium / Aluminum 5005 alloy does not require hot working in most cases. But if it is required the preferable temperature range is 371 to 204°C (700 to 400°F).

Cold Working:
Aluminium / Aluminum 5005 alloy has excellent cold working capacity including the harder tempers.

Annealing:
Annealing can be performed at 343°C (650°F) if required. This should be followed by air cooling.

Hardening:
Aluminium / Aluminum 5005 alloy can be hardened only by cold working.

Applications:
Aluminium / Aluminum 5005 alloy is widely used in the manufacture of the following products:
Small boats
Appliances
Utensils
Gas lines
Refrigerator panels
Fresh and salt water
The 5005 alloy can also used in architectural parts and as an electrical conductor. It is very useful to avoid excessive finishing costs when using the 3003 alloys due to surface roughness while drawing.

 

Thickness		0.1mm - 6.0mm (Aluminum Sheet)
		6.0mm - 600mm (Aluminum Plate)
Width		1000mm - 2800mm
Length		Up to 16m
Temper		O, H12, H22, H32, H14, H24, H34, H16, H26, H36, H18, H28, H38, H19, H25, H27,H111, H112,H241, H332, T3, T4, T5, T6, T651, T3651, T451, T42, T62 etc.
Surface Treatment		Mill Finished, Anodized, Embossed, PVC Coated, etc
1000 Series	1050	Insulation, food industry, decoration, lamp, traffic signs, etc.
	1060	Fan blade, Lamps and lanterns, Capacitor shell, Auto parts, Welding parts.
	1070	Capacitor, Rear panel of vehicle refrigerator, charging point, heat sink, etc
	1100	Cooker, building material, printing, heat exchanger, bottle cap, etc
2000 Series	2A12	Aircraft structures, rivets, aviation, machinery, missile components, the card wheel hub, propeller components, aerospace parts,car parts and various other structural parts.
	2014
	2024
	2017
3000 Series	3003	Aluminum curtain wall panel, aluminum Ceiling, Electric cooker bottom, TV LCD backboard, storage tank, curtain wall, building construction panel heat sink, billboard. Industrial floor, air conditioning, refrigerators radiators, Make-up board, Prefabricated house etc.
	3004
	3005
	3104
	3105
5000 Series	5005	Marine applications, bodies of boats, buses, trucks, and trailers. Curtain wall panel.
	5052	Marine and transportation material, railway carriage's inner and outer cabinet, oil and chemical industry storage devices, equipment and medical device panel, etc.
	5083	Tanker, oil storage tank, drilling platform, shipboard, deck, bottom, welded parts and edge panel, railway carriage's board, automotive and aircraft panel, cooling device, and automotive molding, etc.
	5086
	5182
	5252
	5454
	5754	Tanker body, marine facilities, pressure container, transportation etc.
6000 Series	6005	Railway inside and outside parts, board, and bed plate. Industry molding Highly stressed applications include Roofing construction, transportation, and marine as well as mold. Auto parts, architectural fabrication, window and door frames, aluminum furniture, electronic components as well as various consumer durable products.
	6060
	6061
	6063
	6082
	6101
7000 Series	7005	Truss, rod/bar, and the container in transportation vehicles; Large-sized heat exchangers.
	7050	Molding (bottles) mode, ultrasonic plastic welding mold, golf head, shoe mold, paper and plastic molding, foam molding, lost wax mold, templates, fixtures, machinery and equipment.
	7075	Aerospace industry, military industry, electronic etc.

 

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others	Al
1050	0.25	0.4	0.05	0.05	0.05	-	0.05	0.03	0.15	99.5
1060	0.25	0.35	0.05	0.03	0.03	-	0.03	0.03	0.15	99.6
1070	0.2	0.25	0.04	0.03	0.03	-	0.04	0.03	0.15	99.7
1100	Si + Fe<=0.95		0.05-0.20	0.05	-	-	0.1	-	0.15	99
2011	0.4	0.7	5.0-6.0	0.20-0.60		-	0.3	-	0.15	Remaining
2014	0.5-1.2	0.5	3.9-5.0	0.4-1.2	0.2-0.8	0.1	0.25	0.15	0.15	Remaining
2024	0.5	0.5	3.8-4.9	0.30-0.9	1.2-1.8	0.1	0.25	0.15	0.15	Remaining
3003	0.6	0.7	0.05-0.20	1.0-1.5	-	-	0.1	-	0.15	Remaining
3004	0.3	0.7	0.25	1.0-1.5	0.8-1.3	-	0.25	-	0.15	Remaining
3005	0.6	0.7	0.3	1.0-1.5	0.20-0.6	0.1	0.25	0.1	0.15	Remaining
3105	0.6	0.7	0.3	0.3~0.8	0.2~0.8	0.2	0.4	0.1	0.15	Remaining
5005	0.3	0.7	0.2	0.2	0.50-1.1	0.1	0.25	-	0.15	Remaining
5052	0.25	0.4	0.1	0.1	2.2-2.8	0.15-0.35	0.1	-	0.15	Remaining
5083	0.4	0.4	0.1	0.4-1.0	4.0~4.9	0.05~0.25	0.25	0.15	0.15	Remaining
5252	0.08	0.1	0.1	0.1	2.2-2.8	-	0.05	-	0.1	Remaining
5754	0.4	0.4	0.1	0.5	2.6~3.6	0.3	0.2	0.15	0.15	Remaining
6061	0.40-0.8	0.7	0.15-0.40	0.15	0.8-1.2	0.04-0.35	0.25	0.15	0.15	Remaining
7075	0.4	0.5	1.2-2.0	0.3	2.1-2.9	0.18-0.28	5.1-6.1	0.2	0.15	Remaining

Alloy	Temper	Tensile Strength	Yield Strength	Elongation (%)		Tensile Strength	Yield Strength
		(ksi)	(ksi)	0.01-0.05 in	0.051-0.125 in	(MPa)	(MPa)
1100	H12	16	15	4	12	110.3	103.4
	H14	18	17	3	10	124.1	117.2
3003	H12	19	18	9	11	131	124.1
	H14	22	21	3	7	151.7	144.8
3004	H32	31	25	6	15	213.7	172.4
	H34	35	29	5	10	241.3	199.9
3005	H12	26	24	5	13	179.3	165.5
	H14	29	28	4	9	199.9	193.1
5005	H12	20	19	5	9	137.9	131
	H14	23	22	4	7	158.6	151.7
5052	H32	33	28	7	10	227.5	193.1
	H34	38	31	6	8	262	213.7
5056	O	42	22	23	24	289.6	151.7
	H38	60	50	6	13	413.7	344.7
6061	T4	35	21	22	24	241.3	144.8
	T6	45	40	12	17	310.3	275.8
7075	O	33	15	16	18	227.5	103.4
	T6	83	73	11	12	572.3	503.3

Aluminum Sheet


1. Thickness: 0.1mm to 3.0mm
2. Width: Upto 2000mm
3. Lenth: as the requirement
4. Standard size: 1000*2000, 4'*8', 5'*10', 1250*2500,1500*3000
5. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc
6. Surface: mill, bright, polished, hairline, brush, sand blast, checkered, embossed, etching, etc
7. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.
8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report
9. Technique: DC/CC
10. Anodized: Available 

Aluminum Plate


1. Thickness: 3.0mm to 600mm
2. Width: Upto 2800mm
3. Lenth: as the requirement
4. Standard size: 1000*2000, 4'*8', 5'*10', 1250*2500,1500*3000
5. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc
6. Surface: mill, bright, polished, hairline, brush, sand blast, checkered, embossed, etching, etc
7. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.
8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report
9. Technique: DC/CC
10. Anodized: Available 
11. Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.

Aluminum Checker Sheet


1. Thickness: 0.3mm to 6.0mm
2. Width: Upto 1500mm
3. Lenth: as the requirement
4. Standard size: 1000*2000, 4'*8', 5'*10', 1250*2500,1500*3000
5. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc
6. Surface: mirror polished with PVC coating, silver finish
7. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.
8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report
9. Pattern: 1 bar, 2 bars, five bars, lentils, willow leaf, or diamond pattern
10. Theoretical Weight:  Plus 0.6kg/sqm
11. Material: 1050, 1060, 1100, 3003, 3105, 4017, 5052, 5083, 5086, 5754, 6061, 6063

 Aluminum Circle


1. Thickness: 0.1mm to 3.0mm
2. Diameter: Upto 600mm
3. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc
6. Surface: mill finish, anodized, etc
7. Temper: O, H12, H14, H22, H24, etc.
8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report
9. Technique: DC/CC(DC For cookware and CC for road sign)
10. Anodized: Available 
11. Material Grade: 1050, 1060, 1100, 3003, 3004, 3105

 

Packaging & Shipping

About Our Company

FAQ

Q1:What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.

Q2: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.

Q3: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.

Q4: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, etc.

Q5: What are your company's payment methods?
 A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices. 

Q6: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.

Q7: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack it in wooden cases to ensure the safety of the product in the process of transportation.

Q8: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.

Q9: How to guarantee the quality?
 A: Each production procedure will be subject to testing and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.

Q10: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.

Q11: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.

Q12: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.

Contact Us