| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics, Industrial, Chemical, Pulp and Paper Production, Sour Gas Wells |
| Standard: | JIS, DIN, BS, ASTM, AISI |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Alloy 713C is a precipitation-hardening nickel-chromium base cast alloy. It possesses excellent strength properties up to 1800ºF (980ºC). The alloy has good castability and excellent resistance to oxidation and thermal fatigue.
FORGING:
This alloy is in fact a cast alloy and is not easy to forge, due largely to the preponderance of precipitation elements that must be put into solution prior to forging. On the one hand high temperatures are required to effect this solution and on the other hand the finish forging temperature in itself must be fairly high. We must not forget the high-temperature strength of this alloy, and even with its good high-temperature ductility the hot working process will be difficult.
The alloy may be forged between around 2200/1900ºF (1205/1040ºC).
HEAT TREATMENT:
The alloy is normally used in the as-cast condition, but an improvement in the 1700/1900ºF (925/1040ºC) stress rupture life may be obtained by a solution treatment for 2 hours at 2150ºF (1175ºC) followed by air cooling. Material in this condition, tested under stress at 1350ºF (730ºC) showed a marked decrease in rupture life and ductility. A stabilizing treatment, however, at 1700ºF (925ºC) for 16 hours, followed by air cooling, restores the 1350ºF properties as well as maintaining the high temperature properties. Precipitation treatment is best carried out between 1470/1650ºF (800/900ºC).
MACHINABILITY:
This alloy has a very high rate of work hardening and as such is very difficult to machine. Tools must of course be very sharp and equipment extremely rigid. It is best to put this work in the hands of those most familiar with it. It has been suggested that final machining be done following precipitation treatment.
WELDABILITY:
Using a normal definition, the grade is not weldable, but some success has been noted when welding 713C to other more weldable metals, or matched welds in light sections under little stress. Hastelloy W or Inconel filler metal 92 may be used in the gas tungsten arc process.
Inconel 713C Chemical Composition:
| CHEMICAL ANALYSIS | |
| C | Carbon 0.08/0.20 |
| Mn | Manganese 0.25 max |
| Si | Silicon 0.50 max |
| Cr | Chromium 12.0/14.0 |
| Mo | Molybdenum 3.80/5.20 |
| Cb + Ta | Columbium + Tantalum 1.80/2.80 |
| Al | Aluminium 5.50/6.50 |
| Ti | Titanium 0.50/1.00 |
| Cu | Copper 0.50 max |
| Fe | Iron 2.50 max |
| B | Boron .005/.015 |
| Zr | Zirconium 0.05/0.15 |
Inconel 713C application:
| Nickel Sheet | |
| Thickness | 0.3mm - 6.0mm |
| Width | 1000mm - 2200mm |
| Length | Produce as requirement |
| Nickel Plate | |
| Thickness | 3.0mm - 300mm |
| Width | 1000mm - 3000mm |
| Length | Produce as requirement |
| Nickel Strip / Nickel Foil | |
| Thickness | 0.02mm - 16.0mm |
| Width | 5mm - 900mm |
| Nickel Coil | |
| Thickness | 0.3mm - 16.0mm |
| Width | 1000mm - 3000mm |
| Nickel Pipe | |
| Outside Diameter | 6.0mm - 1219mm |
| Thickness | 0.5mm - 100mm |
| Nickel Capillary Pipe | |
| Outside Diameter | 0.5mm - 6.0mm |
| Thickness | 0.05mm - 2.0mm |
| Nickel Bar | |
| Diameter | Ф4mm - Ф600mm |
| Nickel Wire Rod | |
| Diameter | Ф0.01mm - Ф6.0mm |
| Material Classification | |
| Inconel |
Inconel 722, Inconel 725, Inconel X-750, Inconel 625, Inconel 686, Inconel 690, Inconel 702, Inconel 706, Inconel 713C, Inconel 600, Inconel 601, Inconel 602CA, Inconel 617, Inconel 718.
|
| Incoloy | Incoloy 945, Incoloy A-286, Incoloy 901, Incoloy 903, Incoloy 907, Incoloy 909, Incoloy 925, Incoloy 926, Incoloy 330, Incoloy 800, Incoloy 800H, Incoloy 800HT, Incoloy 801, Incoloy 840, Incoloy 20, Incoloy 205, Incoloy 208 |
| Hastelloy | Hastelloy C 276, Hastelloy G, Hastelloy W, Hastelloy X, Hastelloy G-30, Hastelloy G-35, Hastelloy G3, Hastelloy N, Hastelloy S, B-2, Hastelloy B-3, Hastelloy C2000, Hastelloy C22 |
| Haynes | Haynes 75, Haynes 244, Haynes 25, Haynes 263, Haynes 282, Haynes 556, Haynes 188, Haynes 230, Haynes 233, Haynes 242 |
| Monel | Monel 400, Monel K-500, Monel R405, Monel 401, Monel 404, Monel 405. |
| Nimonic | Nimonic 91, Nimonic C263, Nimonic PE11, Nimonic PE16, Nimonic PK33, Nimonic 80A, Nimonic 96, Nimonic 90, Nimonic 901, Nimonic 105, Nimonic 115 |
| Other Nickel | Waspaloy, Multimet N155, Mumetal 80, Rene 41, Kovar, Maraging 250, Maraging 300, Maraging 350, MP159, MP35N, Alloy 46, Alloy 48, Alloy 52, Alloy 42, Alloy 45, Cobalt alloy 6b, Custom 455, Invar 36, Invar 42, Nickel 200, Nickel 201 |
Q: What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.
Q: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.
Q: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.
Q: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, Outokumpu, etc.
Q: What are your company's payment methods?
A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices.
Q: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.
Q: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack it in wooden cases to ensure the safety of the product in the process of transportation.
Q: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.
Q: How to guarantee the quality?
A: Each production procedure will be subject to test and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.
Q: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.
Q: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.
Q: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.
){kind=link}