| Customization: | Available |
|---|---|
| Color: | Silver |
| Application: | Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
6262 aluminum is an alloy primarily composed of aluminum (Al) with small amounts of magnesium (Mg) and silicon (Si). It belongs to the 6xxx series of aluminum alloys, which are known for their combination of strength, formability, and corrosion resistance.
Here are some key characteristics and applications of 6262 aluminum:
Strength: 6262 aluminum offers good strength properties, making it suitable for applications that require structural integrity. It has a higher tensile strength compared to many other aluminum alloys in the 6xxx series.
Formability and Machinability: 6262 aluminum exhibits good formability, allowing it to be shaped and formed using various processes such as extrusion, rolling, bending, and machining. It is also known for its excellent machinability, making it easier to work with compared to some other aluminum alloys.
Corrosion Resistance: Like other aluminum alloys, 6262 exhibits good corrosion resistance. It forms a protective oxide layer on its surface, which helps protect it from environmental elements. However, it may not offer the same level of corrosion resistance as some other aluminum alloys, such as those in the 5xxx series.
Weldability: 6262 aluminum has good weldability, allowing it to be easily joined using various welding techniques such as TIG (Tungsten Inert Gas) welding, MIG (Metal Inert Gas) welding, and resistance welding. However, as with any aluminum alloy, proper welding procedures and precautions should be followed to ensure quality welds.
Applications: 6262 aluminum is commonly used in applications that require strength and machinability. It is often used in the manufacturing of machined parts, such as fittings, valves, and fasteners. It is also used in various structural components, including frames, beams, and brackets.
These are general characteristics and applications of 6262 aluminum, but it's important to note that the specific mechanical and physical properties can vary depending on factors such as the temper designation (e.g., T6, T651, etc.), manufacturing processes, and specific application requirements. If you have more specific questions or requirements about 6262 aluminum, I recommend consulting with an aluminum supplier or industry expert who can provide detailed information based on the specific context of your application.
| Thickness | 0.1mm - 6.0mm (Aluminum Sheet) | |
| 6.0mm - 600mm (Aluminum Plate) | ||
| 0.1mm - 6.0mm (Aluminum Strip) | ||
| 0.1mm - 6.0mm (Aluminum Coil) | ||
| 0.005mm - 0.2mm (Aluminum Foil) | ||
| 0.3mm - 6.0mm (Aluminum Checkered Sheet) | ||
| Width | Aluminium Sheet/Plate: 1000mm - 2650mm | |
| Aluminium Coil: 1000mm - 2000mm | ||
| Aluminium Strip: 5mm - 900mm | ||
| Aluminium Foil: Less than 2050mm | ||
| Aluminium Checkered Sheet: Less than 1500mm | ||
| Length | Up to 16m | |
| Technical | DC/CC | |
| Standard Size | 1000*2000mm, 1220*2440mm, 1250*2500mm, 1500*3000mm, 4'*8', 5'*10', etc | |
| Standard | ASTM B209, GB/T 3880, EN 573-3, BS EN 485, ASTM B632, ASTM B928, GB/T 3198, ASTM B373, etc | |
| Temper | O, H12, H22, H32, H14, H24, H34, H16, H26, H36, H18, H28, H38, H19, H25, H27,H111, H112,H241, H332, T3, T4, T5, T6, T651, T3651, T451, T42, T62 etc. | |
| Surface Treatment | Mill Finished, Anodized, Embossed, PVC Coated, etc | |
| 1000 Series | 1050 | Insulation, food industry, decoration, lamp, traffic signs, etc. |
| 1060 | Fan blade, Lamps and lanterns, Capacitor shell, Auto parts, Welding parts. | |
| 1070 | Capacitor, Rear panel of vehicle refrigerator, charging point, heat sink, etc | |
| 1100 | Cooker, building material, printing, heat exchanger, bottle cap, etc | |
| 2000 Series | 2A12 | Aircraft structures, rivets, aviation, machinery, missile components, the card wheel hub, propeller components, aerospace parts,car parts and various other structural parts. |
| 2014 | ||
| 2024 | ||
| 2017 | ||
| 3000 Series | 3003 | Aluminum curtain wall panel, aluminum Ceiling, Electric cooker bottom, TV LCD backboard, storage tank, curtain wall, building construction panel heat sink, billboard. Industrial floor, air conditioning, refrigerators radiators, Make-up board, Prefabricated house etc. |
| 3004 | ||
| 3005 | ||
| 3104 | ||
| 3105 | ||
| 5000 Series | 5005 | Marine applications, bodies of boats, buses, trucks, and trailers. Curtain wall panel. |
| 5052 | Marine and transportation material, railway carriage's inner and outer cabinet, oil and chemical industry storage devices, equipment and medical device panel, etc. | |
| 5083 | Tanker, oil storage tank, drilling platform, shipboard, deck, bottom, welded parts and edge panel, railway carriage's board, automotive and aircraft panel, cooling device, and automotive molding, etc. | |
| 5086 | ||
| 5182 | ||
| 5252 | ||
| 5454 | ||
| 5754 | Tanker body, marine facilities, pressure container, transportation etc. | |
| 6000 Series | 6005 | Railway inside and outside parts, board, and bed plate. Industry molding Highly stressed applications include Roofing construction, transportation, and marine as well as mold. Auto parts, architectural fabrication, window and door frames, aluminum furniture, electronic components as well as various consumer durable products. |
| 6060 | ||
| 6061 | ||
| 6063 | ||
| 6082 | ||
| 6101 | ||
| 7000 Series | 7005 | Truss, rod/bar, and the container in transportation vehicles; Large-sized heat exchangers. |
| 7050 | Molding (bottles) mode, ultrasonic plastic welding mold, golf head, shoe mold, paper and plastic molding, foam molding, lost wax mold, templates, fixtures, machinery and equipment. | |
| 7075 | Aerospace industry, military industry, electronic etc. | |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 0.15 | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.03 | 0.03 | 0.15 | 99.6 |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | 0.04 | 0.03 | 0.15 | 99.7 |
| 1100 | Si + Fe<=0.95 | 0.05-0.20 | 0.05 | - | - | 0.1 | - | 0.15 | 99 | |
| 2011 | 0.4 | 0.7 | 5.0-6.0 | 0.20-0.60 | - | 0.3 | - | 0.15 | Remaining | |
| 2014 | 0.5-1.2 | 0.5 | 3.9-5.0 | 0.4-1.2 | 0.2-0.8 | 0.1 | 0.25 | 0.15 | 0.15 | Remaining |
| 2024 | 0.5 | 0.5 | 3.8-4.9 | 0.30-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | 0.15 | Remaining |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | - | - | 0.1 | - | 0.15 | Remaining |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | 0.25 | - | 0.15 | Remaining |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.20-0.6 | 0.1 | 0.25 | 0.1 | 0.15 | Remaining |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | 0.4 | 0.1 | 0.15 | Remaining |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50-1.1 | 0.1 | 0.25 | - | 0.15 | Remaining |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | - | 0.15 | Remaining |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | 0.15 | Remaining |
| 5252 | 0.08 | 0.1 | 0.1 | 0.1 | 2.2-2.8 | - | 0.05 | - | 0.1 | Remaining |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6~3.6 | 0.3 | 0.2 | 0.15 | 0.15 | Remaining |
| 6061 | 0.40-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | Remaining |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | 0.15 | Remaining |
|
Alloy
|
Temper
|
Tensile Strength
|
Yield Strength
|
Elongation (%)
|
Tensile Strength
|
Yield Strength
|
|
|
|
(ksi)
|
(ksi)
|
0.01-0.05 in
|
0.051-0.125 in
|
(MPa)
|
(MPa)
|
|
|
1100 |
H12
|
16
|
15
|
4
|
12
|
110.3
|
103.4
|
|
H14
|
18
|
17
|
3
|
10
|
124.1
|
117.2
|
|
|
3003 |
H12
|
19
|
18
|
9
|
11
|
131
|
124.1
|
|
H14
|
22
|
21
|
3
|
7
|
151.7
|
144.8
|
|
|
3004 |
H32
|
31
|
25
|
6
|
15
|
213.7
|
172.4
|
|
H34
|
35
|
29
|
5
|
10
|
241.3
|
199.9
|
|
|
3005 |
H12
|
26
|
24
|
5
|
13
|
179.3
|
165.5
|
|
H14
|
29
|
28
|
4
|
9
|
199.9
|
193.1
|
|
|
5005 |
H12
|
20
|
19
|
5
|
9
|
137.9
|
131
|
|
H14
|
23
|
22
|
4
|
7
|
158.6
|
151.7
|
|
|
5052 |
H32
|
33
|
28
|
7
|
10
|
227.5
|
193.1
|
|
H34
|
38
|
31
|
6
|
8
|
262
|
213.7
|
|
|
5056 |
O
|
42
|
22
|
23
|
24
|
289.6
|
151.7
|
|
H38
|
60
|
50
|
6
|
13
|
413.7
|
344.7
|
|
|
6061 |
T4
|
35
|
21
|
22
|
24
|
241.3
|
144.8
|
|
T6
|
45
|
40
|
12
|
17
|
310.3
|
275.8
|
|
|
7075 |
O
|
33
|
15
|
16
|
18
|
227.5
|
103.4
|
|
T6
|
83
|
73
|
11
|
12
|
572.3
|
503.3
|
|
Q1:What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.
Q2: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.
Q3: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.
Q4: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, etc.
Q5: What are your company's payment methods?
A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices.
Q6: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.
Q7: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack it in wooden cases to ensure the safety of the product in the process of transportation.
Q8: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.
Q9: How to guarantee the quality?
A: Each production procedure will be subject to testing and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.
Q10: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.
Q11: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.
Q12: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.
){kind=link}