Manufacture Monel K500 Nickel Alloy Plate Nus 2.4375 Nickel Bar Monel K400 Pipe Price

• Application: Aviation, Electronics, Industrial, Chemical
• Standard: JIS, DIN, BS, ASTM, AISI
• Purity: Min 63%
• Alloy: Alloy
• Type: Nickel Bar
• Powder: Not Powder
• Model NO.: Monel K500, Monel K400
• Thickness: 0.2-100mm
• Width: Normally 1000mm/1219mm/1500mm
• Length: Normally 2000mm/2438mm/6000mm
• Mtc: En 10204/3.1
• Keyword: Monel K500 Round Bar
• Trademark: ZYTC
• Origin: Tianjin, China
• HS Code: 75062000
• Production Capacity: 500 Tons/Month

Product Description

Monel Alloy K500 UNS N05500

Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic
of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness,
are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect
precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater
tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three
times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened
by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays
ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.

This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on
the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving
a magnetic nickel rich film on the outside. Pickling or bright dipping in acid can remove this magnetic film and restore
the non-magnetic properties
Alloy K500 has outstanding corrosion resistance in a variety of environments and is currently employed in marine, oil
and gas and chemical environments. The alloy has excellent mechanical properties ranging from sub-zero temperatures
up to around 480°C. Alloy K500 demonstrates excellent corrosion resistance in many environments including pure
water to non-oxidising mineral acids, salts and alkalis.

What are the characteristics of Monel K500?

• Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing
• mineral acids, salts and alkalis.
• Excellent resistance to high velocity sea water
• Resistant to a sour-gas environment
• Excellent mechanical properties from sub-zero temperatures up to about 480C
• Non-magnetic alloy

In what applications is Monel K-500 used?

• Sour-gas service applications
• Oil and gas production safety lifts and valves
• Oil-well tools and instruments like drill collars
• Oil well industry
• Doctor blades and scrapers
• Chains, cables, springs, valve trim, fasteners for marine service
• Pump shafts and impellers in marine service

Chemical compostion

Ni	C	Al	Cu	Ti	Si	Fe
63-70%	Max0.25	2.35-3.5	Re	0.35-0.85	Max0.5	Max2.0