1) Product Description:
Aluminium foil (or aluminum foil), often referred to with the misnomer tin foil, is aluminium prepared in thin metal leaves with a thickness less than 0.2 mm (7.9 mils);Thinner gauges down to 6 micrometres (0.24 mils) are also commonly used.In the United States, foils are commonly gauged in thousandths of an inch or mils.Standard household foil is typically 0.016 mm (0.63 mils) thick, and heavy duty household foil is typically 0.024 mm (0.94 mils).The foil is pliable, and can be readily bent or wrapped around objects.Thin foils are fragile and are sometimes laminated to other materials such as plastics or paper to make them more useful.Aluminium foil supplanted tin foil in the mid 20th century.
2) Manufacture:
Aluminium foil is produced by rolling sheet ingots cast from molten billet aluminium, then re-rolling on sheet and foil rolling mills to the desired thickness, or by continuously casting and cold rolling.To maintain a constant thickness in aluminium foil production, beta radiation is passed through the foil to a sensor on the other side.If the intensity becomes too high, then the rollers adjust, increasing the thickness.If the intensities become too low and the foil has become too thick, the rollers apply more pressure, causing the foil to be made thinner.
The continuous casting method is much less energy intensive and has become the preferred process.For thicknesses below 0.025 mm (1 mil), two layers are usually put together for the final pass and afterwards separated which produces foil with one bright side and one matte side.The two sides in contact with each other are matte and the exterior sides become bright;This is done to reduce tearing, increase production rates, control thickness, and get around the need for a smaller diameter roller.[9]
Some lubrication is needed during the rolling stages;Otherwise, the foil surface can become marked with a herringbone pattern.These lubricants are sprayed on the foil surface before passing through the mill rolls.Kerosene based lubricants are commonly used, although oils approved for food contact must be used for foil intended for food packaging.
Aluminium becomes work hardened during the cold rolling process and is annealed for most purposes.The rolls of foil are heated until the degree of softness is reached, which may be up to 340°C (644 °F) for 12 hours.During this heating, the lubricating oils are burned off, leaving a dry surface.Lubricant oils may not be completely burnt off for hard temper rolls, which can make subsequent coating or printing more difficult.
The rolls of aluminium foil are then slit on slitter rewinding machines into smaller rolls.Roll slitting and rewinding is an essential part of the finishing process.
3)Properties:
Aluminium foils thicker than 25 µm (1 mil) are impermeable to oxygen and water.Foils thinner than this become slightly permeable due to minute pinholes caused by the production process.
Aluminium foil has a shiny side and a matte side.The shiny side is produced when the aluminium is rolled during the final pass.It is difficult to produce rollers with a gap fine enough to cope with the foil gauge, therefore, for the final pass, two sheets are rolled at the same time, doubling the thickness of the gauge at entry to the rollers.When the sheets are later separated, the inside surface is dull, and the outside surface is shiny.This difference in the finish has led to the perception that favouring a side has an effect when cooking.While many believe (wrongly) that the different properties keep heat out when wrapped with the shiny finish facing out, and keep heat in with the shiny finish facing inwards, the actual difference is imperceptible without instrumentation.Increased reflectivity decreases both absorption and emission of radiation.Foil may have a non-stick coating on only one side.The reflectivity of bright aluminium foil is 88% while dull embossed foil is about 80%.
4)Applications:
Packaging
Insulation
Electromagnetic shielding
Cooking
Art and decoration
Geochemical sampling
Ribbon microphones
5)Aluminum Foil Product Range:
| Product |
Alloy |
Temper |
Thickness
mm |
Width
mm |
Coil I.D
mm |
Coil O.D
mm |
Aluminium Foil
|
1235 |
H18 H26
H24 O |
0.00635~0.2 |
90 to 1520 |
75/150/500 |
200 to 1700 |
| 8011 |
H18 H26
H24 O |
0.00635~0.2 |
90 to 1520 |
75/150/500 |
200 to 1700 |
| 8006 |
H18 H26
H24 O |
0.00635~0.2 |
90 to 1520 |
75/150/500 |
200 to 1700 |
| 1060/1100 |
H18 H26
H24 O |
0.00635~0.2 |
90 to 1520 |
75/150/500 |
200 to 1700 |
Aluminum Foil Description:
| Thickness |
0.005mm - 0.2mm |
| Width |
100mm - 2050mm |
| Coil Weight |
as requirements |
| Temper |
O, H12, H14, H16, H18, H22, H24, etc |
| Coil Inner Diameter |
76mm, 152mm, 300mm, 405mm, 505mm or as requests |
| Surface |
Normal is one side bright, one side matt/ Both side bright/As required |
| Aluminum Foil Type |
Medicinal Aluminum Foil, Battery Aluminum Foil, Electronic Aluminium Foil, Tape Aluminum Foil, Food Packaging Aluminum Foil, Heat Sealing Aluminum Foil |
| Aluminum Foil Grade |
1050, 1060, 1070, 1100, 1235, 3003, 3004, 5052, 8006, 8011, 8079, 8021 |
Q: What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.
Q: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.
Q: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.
Q: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, Outokumpu, etc.
Q: What are your company's payment methods?
A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices.
Q: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.
Q: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack it in wooden cases to ensure the safety of the product in the process of transportation.
Q: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.
Q: How to guarantee the quality?
A: Each production procedure will be subject to testing and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.
Q: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.
Q: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.
Q: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.
Audited Supplier 
){kind=link}
){kind=link}