|
UNS N04400 Competitive Price Monel 400 Nickel Based Alloy Strip for Aerospace applications
Monel 400
| Material |
Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy |
| Shape |
Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet |
Grade |
Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
| |
Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc |
| |
Alloy : Alloy 20/28/31 |
| |
Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g |
| |
Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C,
Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,
Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 |
| |
Haynes: Haynes 230/556/188 |
| |
Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20 |
| |
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851,
Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816 |
| |
Incoloy: Incoloy 800/800H/800HT/825/925/926; |
| |
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 |
| |
Monel: Monel 400/K500/R405 |
| |
Nitronic: Nitronic 40/50/60; |
| |
Nimonic: Nimonic 75/80A/90/A263 ; |
Specification |
Wire: 0.01-10mm
Strip: 0.05*5.0-5.0*250mm
Bar: φ4-50mm;Length 2000-5000mm
Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm
Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm |
Product
Characteristics |
1.According to the preparation process can be divided into deformation superalloys,
casting superalloys and powder metallurgy superalloys.
2.According to the strengthening mode, there are solid solution strengthening type, precipitation
strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.. |
| Standard |
GB,AISI,ASTM,DIN,EN,SUS,UNS etc |
| Inspection |
ISO,SGS,BV and so on. |
Application |
High temperature components such as turbine blades, guide vanes, turbine disks,
high pressure compressor disks,machine manufacturing
and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines |
Packaging |
1. cases packed in wooden cases
2. paper packaging
3. plastic packing
4. foam packaging
Packaging according to customer requirements or products |
| Delivery |
7-25days orAccording to the product |
Payment |
L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirements payments
for offline orders. |
Available in any of the 'profile options'
A Nickel-Copper alloy with high strength and excellent corrosion resistance in a range of acidic and alkaline environments and especially suitable for reducing conditions. It also has good ductility and thermal conductivity.
Monel 400 is also known as Phyweld 400 and Nicorros LC.
| Chemical Composition |
Specifications |
Designations |
Key Features |
Typical Applications |
| Element |
Min % |
Max % |
| C |
- |
0.3 |
| Si |
- |
0.50 |
| Mn |
- |
2.00 |
| S |
- |
0.024 |
| Cu |
28.00 |
34.00 |
| Fe |
- |
2.50 |
| Ni+Co |
63.00 |
70.00 |
| Co |
- |
2.0 |
|
AMS 4730
ASTM B164
BS 3075 NA 13
BS 3076 NA 13
DTD 204B
ISO 15156-3
(NACE MR 0175)
QQ-N-281 |
W.Nr 2.4361
W.Nr 2.4360
UNS N04400
AWS 040 |
Excellent corrosion resistance in a wide range of acidic & alkaline environments
Especially suitable for reducing conditions
Good ductility & thermal conductivity
Good for sea water applications |
Marine Engineering
Chemical Processing
Hydro-carbon Processing
Heat Exchangers
Valves
Pumps |
| Density |
8.8 g/cm³ |
0.318 lb/in³ |
| Melting Point |
1350°C |
2460°F |
| Coefficient of Expansion |
13.9 μm/m °C (20 - 100°C) |
7.7 x 10-6 in/in °F (70 - 212°F) |
| Modulus of Rigidity |
65.3 kN/mm² |
9471 ksi |
| Modulus of Elasticity |
173 kN/mm² |
25092 ksi |
| Heat Treatment of Finished Parts |
| Condition as supplied by Alloy Wire |
Type |
Temperature |
Time (Hr) |
Cooling |
| °C |
°F |
| Annealed or Spring Temper |
Stress Relieve |
300 - 320 |
570 - 610 |
0.5 - 1 |
Air |
| Properties |
| Condition |
Approx. tensile strength |
Approx. operating temperature |
| N/mm² |
ksi |
°C |
°F |
| Annealed |
400 - 600 |
58 - 87 |
-200 to +230 |
-330 to +445 |
| Spring Temper |
850 - 1050 |
123 - 152 |
-200 to +230 |
-330 to +445 |
The above tensile strength ranges are typical. If you require different please ask.
-
Fabrication
Machinability
The machinability of MONEL 400 is difficult as it work-hardens during machining. The conventional machining techniques used on iron alloys may be used for this alloy.
Welding
Welding methods including gas-arc welding, metal-arc welding, gas-metal-arc welding and submerged-arc welding are recommended on this alloy.
Forging
Forging of this alloy is to be done by controlled procedures.
Hot working
Hot working on this alloy needs to be done by choosing proper temperatures. Typical temperatures for hot working range between 648-1176°C (1200-2150°F).
Cold working
Cold working may be done using soft die materials for better finishing.
Annealing
MONEL 400 alloy may be annealed at 926°C (1700°F).
Applications
The MONEL 400 alloy is used in the following applications:-
- Marine fixtures, pumps, valves and piping systems for sea water applications
- Chemical plant equipment
- Frames for eyeglasses
- Aerospace applications
- Musical instruments.
|
Audited Supplier 
){kind=link}
){kind=link}