Premium Monel 404 Nickel Alloy Bar for Industrial Sealing Solutions

Product Description

Large Diameter Monel 404 Nickel Alloy Bar for Ceramic to Metal Sealing

Material	Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
Shape	Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
Grade	Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
	Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc
	Alloy : Alloy 20/28/31
	Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g
	Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665
	Haynes: Haynes 230/556/188
	Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20
	Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816
	Incoloy: Incoloy 800/800H/800HT/825/925/926;
	GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
	Monel: Monel 400/K500/R405
	Nitronic: Nitronic 40/50/60;
	Nimonic: Nimonic 75/80A/90/A263 ;
Specification	Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm  Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Product  Characteristics	1.According to the preparation process can be divided into deformation superalloys,  casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation  strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..
Standard	GB,AISI,ASTM,DIN,EN,SUS,UNS etc
Inspection	ISO,SGS,BV and so on.
Application	High temperature components such as turbine blades, guide vanes, turbine disks,  high pressure compressor disks,machine manufacturing and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines
Packaging	1. cases packed in wooden cases 2. paper packaging 3. plastic packing 4. foam packaging Packaging according to customer requirements or products
Delivery	7-25days orAccording to the product
Payment	L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirements payments for offline orders.

Introduction

MONEL alloys contain nickel and copper as the main components. Robert Crooks Stanley discovered this alloy in 1901 while working at the International Nickel Company.

There are a number of MONEL alloys available commercially including MONEL 400, 401, 404, R-405, 450 and K-500. The standard forms in which MONEL alloys are available are hexagon, flats, forging stock, tube and pipe.

MONEL 404 has a relatively high copper content, hence is suitable for electric and electronic applications. The content of the elements that make up the MONEL 404 is adjusted such that the alloy has a very low Curie temperature, low permeability and good brazing characteristics.

This datasheet will look into the chemical composition, properties and applications of MONEL 404 alloy.

Chemical Composition

The chemical composition of MONEL 404 alloy is given in the following table.

Element	Content (%)
Nickel, Ni	50 - 57 max
Copper, Cu	≤ 45.5
Iron, Fe	≤ 0.50
Carbon, C	≤ 0.15
Manganese, Mn	≤ 0.10
Silicon, Si	≤ 0.10
Aluminum, Al	≤ 0.050
Sulfur, S	0.024

Physical Properties

The following table discusses the physical properties of MONEL 404 alloy.

Properties	Metric	Imperial
Density	8.91 gm/cm^3	0.322 lb/in^3

Mechanical Properties

The mechanical properties of MONEL 404 alloy are tabulated below.

Properties	Metric	Imperial
Tensile strength(annealed)	483 MPa	70 ksi
Yield strength(annealed)	172 MPa	25 ksi
Poissons Ratio	0.295	0.295
Modulus of Elasticity	169 GPa	24500 ksi

Other Designations

Some of the other designations that are used to denote MONEL 404 alloy are as below:-

• UNS N04404
• ASTM F96

Fabrication

Machinability

Conventional machining techniques used on iron alloys may be used for this alloy.

Welding

Alloy 404 is can be welded using common welding techniques.

Hot working

This alloy cannot be hot worked.

Forging

Alloy 404 can be forged.

Cold working

Cold working may be done using standard tooling and soft die materials for better finish.

Annealing

MONEL 404 alloy should be annealed at 760°C (1400°F) for one hour.

Applications

The MONEL 404 alloy is used in the following applications:

• Capsules for transistors
• Ceramic to metal sealing

 

 

Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .