|
Seamless Incoloy 800H Nickel Based Alloy Tube for Carburising equipment
| Material |
Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy |
| Shape |
Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet |
| Grade |
Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
| |
Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc |
| |
Alloy : Alloy 20/28/31 |
| |
Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g |
| |
Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C,
Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,
Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 |
| |
Haynes: Haynes 230/556/188 |
| |
Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20 |
| |
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851,
Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816 |
| |
Incoloy: Incoloy 800/800H/800HT/825/925/926; |
| |
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 |
| |
Monel: Monel 400/K500/R405 |
| |
Nitronic: Nitronic 40/50/60; |
| |
Nimonic: Nimonic 75/80A/90/A263 ; |
Specification |
Wire: 0.01-10mm
Strip: 0.05*5.0-5.0*250mm
Bar: φ4-50mm;Length 2000-5000mm
Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm
Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm |
Product
Characteristics |
1.According to the preparation process can be divided into deformation superalloys,
casting superalloys and powder metallurgy superalloys.
2.According to the strengthening mode, there are solid solution strengthening type, precipitation
strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.. |
| Standard |
GB,AISI,ASTM,DIN,EN,SUS,UNS etc |
| Inspection |
ISO,SGS,BV and so on. |
Application |
High temperature components such as turbine blades, guide vanes, turbine disks,
high pressure compressor disks,machine manufacturing
and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines |
Packaging |
1. cases packed in wooden cases
2. paper packaging
3. plastic packing
4. foam packaging
Packaging according to customer requirements or products |
| Delivery |
7-25days orAccording to the product |
Payment |
L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirements payments
for offline orders. |
Incoloy 800 H is an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep rupture strength. The higher strength results from close control of carbon, aluminum and titanium contents in conjunction with a high temp anneal. The 800H modification was to control carbon (0.05 to 0.10%) and grain size to (>ASTM 5) to optimize stress rupture properties. Incoloy 800 H has further modifications to the combined titanium and aluminum levels (0.85 to 1.2%) to ensure optimum high temperature properties. The alloy is dual certified and combines the properties of both forms.
| UNS,ASTM |
N08810 |
Incoloy800H |
| DIN,EN |
1.4958 |
X10NiCrAlTi32-20 |
| GB |
1Cr20Ni32AlTi |
|
| GB |
NS112 |
|
Chemical Compostion(%)
| % |
C |
Si |
Mn |
Cr |
Ni |
Al |
Ti |
Cu |
P |
S |
Fe |
| Min |
0.03 |
- |
- |
19.0 |
30.0 |
0.15 |
0.15 |
- |
- |
- |
0.15 |
| Max |
0.05 |
1.0 |
1.5 |
23.0 |
35.0 |
0.6 |
0.6 |
0.75 |
0.03 |
0.015 |
|
Other Designations
Some of the designations used to denote INCOLOY alloy 800H are listed below:
| UNS N08800 |
AMS 5766 |
AMS 5871 |
ASTM B163 |
ASTM B366 |
| ASTM B407 |
ASTM B408 |
ASTM B409 |
ASTM B514 |
ASTM B515 |
| ASTM B564 |
DIN 1.4876 |
|
|
|
|
){kind=link}