| Customization: | Available |
|---|---|
| Color: | Sliver or as Per Client Required |
| Application: | Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
3004 aluminum sheet belongs to AL-Mn alloy series, which has higher strength than 3003. And the properties of formability, solubility, and anti-corrosion are also pretty good. It usually used to produce some components which request much higher strength than 3003.
| Alloy | Si(%) | Fe(%) | Al(%) | Cu(%) | Mn(%) | Mg(%) | Cr(%) | Zn(%) | Ti(%) | V(%) | Ni(%) |
| 1050 | 0.25 | 0.4 | 99.5 | 0.05 | 0.05 | 0.05 | -- | 0.05 | 0.03 | -- | -- |
| 1060 | 0.25 | 0.35 | 99.6 | 0.05 | 0.03 | 0.03 | -- | 0.05 | 0.03 | 0.05 | -- |
| 1070 | 0.2 | 0.25 | 99.7 | 0.04 | 0.03 | 0.03 | -- | 0.04 | 0.03 | -- | -- |
| 1080 | 0.25 | 0.4 | 99.5 | 0.25 | 0.05 | 0.05 | -- | 0.07 | 0.05 | -- | -- |
| 1100 | 0.95 Si+Fe | 99 | 0.05-0.2 | 0.05 | -- | -- | 0.1 | -- | -- | -- | |
| 1235 | 0.65 Si+Fe | 99.35 | 0.05 | 0.05 | 0.05 | -- | 0.1 | 0.06 | 0.05 | -- | |
| 2A12 | 0.5 | 0.5 | Rem. | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | -- | -- |
| 2A14 | 0.6~1.2 | 0.7 | Rem. | 3.9~4.8 | 0.4~1.0 | 0.4~0.8 | -- | 0.3 | 0.15 | -- | 0.1 |
| 2014 | 0.6~1.2 | 0.7 | Rem. | 3.9~4.8 | 0.4~1.0 | 0.4~0.8 | -- | 0.3 | 0.15 | -- | 0.1 |
| 2024 | 0.5 | 0.5 | Rem. | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | -- | -- |
| 2017 | 0.2~0.8 | 0.7 | Rem. | 3.5~4.5 | 0.4~1.0 | 0.4~0.8 | 0.1 | 0.25 | 0.15 | -- | -- |
| 2124 | 0.5 | 0.5 | Rem. | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | -- | -- |
| 2219 | 0.2 | 0.3 | Rem. | 5.8~6.9 | 0.2~0.4 | 0.02 | 0.1~0.25 | 0.1 | 0.29~0.1 | 0.05~0.25 | -- |
| 3003 | 0.6 | 0.7 | Rem. | 0.05-0.2 | 1.0-1.5 | -- | -- | 0.1 | -- | -- | -- |
| 3004 | 0.3 | 0.7 | Rem. | 0.25 | 1.0-1.5 | 0.8-1.3 | -- | 0.25 | -- | -- | -- |
| 3005 | 0.6 | 0.7 | Rem. | 0.3 | 1.0-1.5 | 0.2-0.6 | 0.1 | 0.25 | 0.1 | -- | -- |
| 3105 | 0.6 | 0.8 | Rem. | 0.3 | 0.5~0.9 | 0.5~0.8 | -- | 0.25 | 0.1 | -- | -- |
| 5A06 | 0.4 | 0.4 | Rem. | 0.1 | 0.5~0.8 | 5.8~6.8 | -- | 0.2 | 0.02~0.1 | -- | -- |
| 5005 | 0.3 | 0.7 | Rem. | 0.2 | 0.2 | 0.5-1.1 | 0.1 | 0.25 | -- | -- | -- |
| 5010 | 0.4 | 0.7 | Rem. | 0.1 | 0.15~0.4 | 0.6~1.4 | 0.15 | 0.3 | 0.15 | -- | -- |
| 5050 | 0.4 | 0.7 | Rem. | 0.2 | 0.1 | 1.1-1.8 | 0.1 | 0.25 | -- | -- | -- |
| 5052 | 0.25 | 0.4 | Rem. | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | -- | -- | -- |
| 5657 | 0.08 | 0.1 | Rem. | 0.1 | 0.03 | 0.6~1.0 | 0.03 | 0.05 | -- | 0.05 | -- |
| 5083 | 0.4 | 0.4 | Rem. | 0.1 | 0.40~1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | -- | -- |
| 5254 | 0.45 Si+Fe | Rem. | 0.05 | 0.01 | 3.1~3.9 | 0.15~0.35 | 0.2 | 0.05 | -- | -- | |
| 5154 | 0.25 | 0.4 | Rem. | 0.1 | 0.1 | 3.1~3.9 | 0.15~0.35 | 0.2 | 0.2 | -- | -- |
| 5252 | 0.08 | 0.1 | Rem. | 0.1 | 0.1 | 2.2-2.8 | -- | 0.05 | -- | -- | -- |
| 5454 | 0.25 | 0.4 | Rem. | 0.1 | 0.5-1.0 | 2.4-3.0 | 0.05-0.20 | 0.25 | 0.2 | -- | -- |
| 5754 | 0.4 | 0.4 | Rem. | 0.1 | 0.5 | 2.6-3.6 | 0.3 | 0.2 | 0.15 | -- | -- |
| 5456 | 0.25 | 0.4 | Rem. | 0.1 | 0.40~1.0 | 4.7~5.5 | 0.05~0.20 | 0.25 | 0.2 | -- | -- |
| 5457 | 0.08 | 0.1 | Rem. | 0.2 | 0.15-0.45 | 0.8-1.2 | -- | 0.05 | -- | -- | -- |
| 5086 | 0.4 | 0.5 | Rem. | 0.1 | 0.20~0.7 | 3.5~4.5 | 0.05~0.25 | 0.25 | 0.15 | -- | -- |
| 6003 | 0.35~1.0 | 0.6 | Rem. | 0.1 | 0.8 | 0.8~1.5 | 0.35 | 0.2 | 0.1 | -- | -- |
| 6013 | 0.6-1.0 | 0.5 | Rem. | 0.6-1.1 | 0.2-0.8 | 0.8-1.2 | 0.1 | 0.25 | 0.1 | -- | -- |
| 6061 | 0.4-0.8 | 0.7 | Rem. | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | -- | -- |
| 6063 | 0.20-0.6 | 0.35 | Rem. | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | -- | -- |
| 6082 | 0.7~1.3 | 0.5 | Rem. | 0.1 | 0.4~1.0 | 0.6~1.2 | 0.25 | 0.2 | 0.1 | -- | -- |
| 6005 | 0.2 | 0.35 | Rem. | 0.15 | 0.2~0.5 | 0.4~0.5 | 0.1 | 0.25 | 0.1 | -- | -- |
| 6101 | 0.3~0.7 | 0.5 | Rem. | 0.1 | 0.03 | 0.35~0.8 | 0.03 | 0.1 | -- | -- | -- |
| 7A04 | 0.5 | 0.5 | Rem. | 1.4~2.0 | 0.2~0.6 | 1.8~2.8 | 0.10~0.25 | 5.0~7.0 | 0.1 | -- | -- |
| 7050 | 0.12 | 0.15 | Rem. | 2.0~2.6 | 0.1 | 1.9~2.6 | 0.04 | 5.7~6.7 | 0.06 | -- | -- |
| 7005 | 0.35 | 0.4 | Rem. | 0.1 | 0.2~0.7 | 1.0~1.8 | 0.06~0.20 | 4.0~5.0 | 0.01~0.06 | -- | -- |
| 7072 | 0.7 Si+Fe | Rem. | 0.1 | 0.1 | 0.1 | -- | 0.8-1.3 | -- | -- | -- | |
| 7075 | 0.4 | 0.5 | Rem. | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | -- | -- |
| Products | Model | Temper | Thickness(mm) | Width(mm) | Length(mm) | |||
| 1000 Series | Industrial Pure Aluminum(1050,1060 ,1070, 1100) | F,O,H12,H14,H16,H18,H19,H22, H24,H26,H28,H111,H112 |
0.1-500 | 20-2650 | 500-16000 | |||
| 2000 Series | Aluminum-copper alloys(2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17) | F, O,T3,T4,T6,T73,T351, H112 | 1.0-600 | 500-2650 | 500-16000 | |||
| 3000 Series | Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105) | F, O, H12, H14, H16, H18, H19, H22,H24,H26, H28,H112, H114 |
0.1-500 | 20-2650 | 500-16000 | |||
| 4000 Series | Al-Si alloys(4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A) | F, O, H12, H14, H16, H18, H19, H22,H24,H26, H28,H112, H114 |
0.1-500 | 20-2650 | 500-16000 | |||
| 5000 Series | Al-Mg alloys(5052, 5083, 5754, 5005, 5086,5182) | F, O, H12, H14, H16, H18, H19, H22,H24,H26, H28,H112, H114 |
0.1-600 | 20-2650 | 500-16000 | |||
| 6000 Series | Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02) | F,O.T4,T6.T651.H112 | 0.3-600 | 20-2650 | 500-16000 | |||
| 7000 Series | Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05) | F,O.T4,T6.T651.H112 | 1.0-600 | <2650 | <8000 | |||
Q1:What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.
Q2: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.
Q3: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.
Q4: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, etc.
Q5: What are your company's payment methods?
A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices.
Q6: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.
Q7: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack it in wooden cases to ensure the safety of the product in the process of transportation.
Q8: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.
Q9: How to guarantee the quality?
A: Each production procedure will be subject to testing and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.
Q10: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.
Q11: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.
Q12: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.
){kind=link}